DescriptionThis video provides step-by-step instructions for replacing the inner oven door glass on Frigidaire gas ranges.
All of the information in this video is applicable to the following brands: Frigidaire
Tools used: Phillips-head screwdriver, & a quarter-inch socket or nut driver.
Step-By-Step Instructions1
Frigidaire Electric Range - Model LFEF3054TFG
2
Electric Range Inner Oven Door Glass Replacement
3
Tools & Assistance Needed
4
"You will need a phillips-head screwdriver for this procedure, and you may need assistance."
5
Be sure to unplug the power cord or shut off the power supply.
6
Fully open the oven door and rotate both door hinge locks back.
7
"Partially close the door, then lift and pull the door toward you to remove."
8
Set the door handle-side down on a towel or blanket.
9
"Using a phillips-head screwdriver, unthread the four bottom screws securing the outer door panel."
10
Unthread the two upper screws securing the door handle and the inner panel assembly.
12
Separate the inner and outer door panels.
13
Unthread the four screws securing the two door hinges.
14
Unthread the spacers from the upper screws and fully remove the screws.
15
Unthread the screws to release the left-and-right-side trim pieces.
16
Unthread the eight screws securing the retaining panel.
17
"Remove the panel, lift out the middle door glass and frame, then set them aside."
18
You can now remove the old inner door glass if still intact.
19
Install the new inner oven door glass by positioning it in the panel.
20
Realign the middle door glass and frame.
21
Reinstall the retaining panel by aligning the bottom edge first.
22
Thread the eight screws to secure.
23
Reinstall the left-and-right-side trim pieces.
24
Reinsert the upper screws through the panel and thread on the spacers.
25
Join the inner door assembly and the outer door panel together.
26
Replace the four bottom screws.
27
"Lower the door to its fully open position, then rotate the hinge locks forward."
28
Congrats! Your electric range is ready for use.