Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairFrigidaire Induction Range Inner Oven Door Glass Replacement 316117502
Frigidaire Induction Range Inner Oven Door Glass Replacement 316117502
Skill Level
Total Parts Cost
$94.45Estimated Savings
$112.5008:27
- Description
This video provides step-by-step repair instructions for replacing the inner oven door glass on a Frigidaire induction range. The most common reason for replacing this part is if it is damaged or dirty.
All of the information for this part replacement video is applicable to the following brands:
Frigidaire
All of the information for this part replacement video is applicable to the following brands:
Frigidaire
Step By Step Instructions
1
Frigidaire Induction Range - GCRI3058AFD
2
Frigidaire Induction Range Inner Oven Door Glass Replacement
3
Tools needed: Phillips-head screwdriver, flat-head screwdriver
4
Shock
5
Before you begin the procedure, unplug the power cord or shut off the power supply.
6
Fully open the oven door, then use the flat-head screwdriver to help rotate the hinge locks forward.
7
Heavy
8
Partially close the door, then lift and pull the door toward you to remove.
9
Set the door handle-side down on a towel or blanket.
10
Use the Phillips-head screwdriver to unthread the two mounting screws securing the door handle.
11
With the screws unthreaded, set the handle aside.
12
Next, unthread the four bottom screws securing the inner door panel assembly to the outer door panel.
13
Heavy
14
Separate the inner panel assembly from the outer panel.
15
Now unthread the upper screw securing the right side hinge to the inner panel.
16
Unthread the two lower screws securing the hinge and fully remove the hinge.
17
Repeat to remove the left-side hinge.
18
Flip the inner panel assembly over and unthread the two screws securing one of the air wash glass mounting brackets.
19
Set the bracket aside and remove the glass.
20
Now unthread the two screws to release the other mounting bracket.
21
Unthread the eight screws securing the retaining panel.
22
Sharp
23
Set the panel aside.
24
If you?re replacing the middle door glass, you can lift it out of the frame if still intact.
25
Otherwise, lift out the glass and frame and you can remove the inner door glass.
26
To install the new inner door glass, align it in the inner door panel.
27
If required, reposition the frame and insert the middle door glass.
28
Realign the retaining panel and secure it by rethreading all eight screws.
29
Realign one of the air wash glass brackets and secure it with the screws.
30
Reposition the air wash glass in the bracket, then align the second bracket and secure it with the screws.
31
Flip the inner door panel assembly over.
32
Realign one of the door hinges, then thread the two lower screws and the upper screw to secure the hinge.
33
Repeat to reinstall the opposite hinge.
34
With the hinges in place, realign the inner door assembly with the outer door panel.
35
Rethread the four bottom screws.
36
Make sure the top edge of the assembly is accessible, then insert the door handle screws.
37
Align the handle and thread the screws into the handle to secure.
38
Reinstall the oven door by inserting the door hinges into the hinge slots at a forty-five degree angle.
39
Lower the door to its fully open position, then rotate the hinge locks back.
40
Plug the power cord back in or restore the power supply and the induction range should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the inner oven door glass on a Frigidaire induction range. The most common reason for replacing this part is if it is damaged or dirty.
All of the information for this part replacement video is applicable to the following brands:
Frigidaire
All of the information for this part replacement video is applicable to the following brands:
Frigidaire
Step-By-Step Instructions
1
Frigidaire Induction Range - GCRI3058AFD
2
Frigidaire Induction Range Inner Oven Door Glass Replacement
3
Tools needed: Phillips-head screwdriver, flat-head screwdriver
4
Shock
5
Before you begin the procedure, unplug the power cord or shut off the power supply.
6
Fully open the oven door, then use the flat-head screwdriver to help rotate the hinge locks forward.
7
Heavy
8
Partially close the door, then lift and pull the door toward you to remove.
9
Set the door handle-side down on a towel or blanket.
10
Use the Phillips-head screwdriver to unthread the two mounting screws securing the door handle.
11
With the screws unthreaded, set the handle aside.
12
Next, unthread the four bottom screws securing the inner door panel assembly to the outer door panel.
13
Heavy
14
Separate the inner panel assembly from the outer panel.
15
Now unthread the upper screw securing the right side hinge to the inner panel.
16
Unthread the two lower screws securing the hinge and fully remove the hinge.
17
Repeat to remove the left-side hinge.
18
Flip the inner panel assembly over and unthread the two screws securing one of the air wash glass mounting brackets.
19
Set the bracket aside and remove the glass.
20
Now unthread the two screws to release the other mounting bracket.
21
Unthread the eight screws securing the retaining panel.
22
Sharp
23
Set the panel aside.
24
If you?re replacing the middle door glass, you can lift it out of the frame if still intact.
25
Otherwise, lift out the glass and frame and you can remove the inner door glass.
26
To install the new inner door glass, align it in the inner door panel.
27
If required, reposition the frame and insert the middle door glass.
28
Realign the retaining panel and secure it by rethreading all eight screws.
29
Realign one of the air wash glass brackets and secure it with the screws.
30
Reposition the air wash glass in the bracket, then align the second bracket and secure it with the screws.
31
Flip the inner door panel assembly over.
32
Realign one of the door hinges, then thread the two lower screws and the upper screw to secure the hinge.
33
Repeat to reinstall the opposite hinge.
34
With the hinges in place, realign the inner door assembly with the outer door panel.
35
Rethread the four bottom screws.
36
Make sure the top edge of the assembly is accessible, then insert the door handle screws.
37
Align the handle and thread the screws into the handle to secure.
38
Reinstall the oven door by inserting the door hinges into the hinge slots at a forty-five degree angle.
39
Lower the door to its fully open position, then rotate the hinge locks back.
40
Plug the power cord back in or restore the power supply and the induction range should be ready for use.
Applicable Product Model
Parts Needed
Inner Door Glass
$94.45
Total$0.00
Related Articles & Videos
03:50
Part Replacement
Frigidaire Gas Range Inner Oven Door Glass Replacement (5304503232)
05:40
Part Replacement
Frigidaire Electric Range Inner Oven Door Glass Replacement (5304503232)
05:23
Part Replacement
Frigidaire Electric Range Middle Oven Door Glass Replacement (5304503232)
06:43
Part Replacement
Frigidaire Induction Range Low-Voltage Wire Harness Replacement 5304522701
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com