Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairFrigidaire Gas Range Top Oven Door Trim Replacement (316491201)
Frigidaire Gas Range Top Oven Door Trim Replacement (316491201)
Skill Level
Total Parts Cost
$87.94Estimated Savings
$112.5003:04
- Description
This video provides step-by-step instructions for replacing the top oven door trim on Frigidaire gas ranges.
All of the information in this video is applicable to the following brands: Frigidaire
Tools used: Phillips-head screwdriver.
All of the information in this video is applicable to the following brands: Frigidaire
Tools used: Phillips-head screwdriver.
Step By Step Instructions
1
Before you replace the top of indoor trim on your gas range,
2
Be sure to unplug the power cord or shut off the power supply.
3
Fully open the oven door and rotate both door hinge locks back.
4
Partially close the door, then lift and pull the door toward you to remove.
5
Set the door handle side down on a towel or blanket.
6
Using a Phillips head screwdriver, unthread the four bottom screws securing the outer door panel.
7
Next, unthread the two upper screws securing the door handle and the inner panel assembly.
8
Set the handle aside.
9
Separate the inner door assembly from the outer panel.
10
You can now slide off the old door trim.
11
Install the new top oven door trim by sliding it onto the outer door panel.
12
Join the inner door assembly and the outer door panel together.
13
Realign the handle and fully thread the upper screws to secure it.
14
Replace the four bottom screws.
15
Reinstall the oven door by inserting the door hinges into the hinge slots at a 45-degree angle.
16
Lower the door to its fully open position, then rotate the hinge locks forward.
17
Plug the power cord back in or restore the power supply, and your gas range should be ready for use.
Description
This video provides step-by-step instructions for replacing the top oven door trim on Frigidaire gas ranges.
All of the information in this video is applicable to the following brands: Frigidaire
Tools used: Phillips-head screwdriver.
All of the information in this video is applicable to the following brands: Frigidaire
Tools used: Phillips-head screwdriver.
Step-By-Step Instructions
1
Before you replace the top of indoor trim on your gas range,
2
Be sure to unplug the power cord or shut off the power supply.
3
Fully open the oven door and rotate both door hinge locks back.
4
Partially close the door, then lift and pull the door toward you to remove.
5
Set the door handle side down on a towel or blanket.
6
Using a Phillips head screwdriver, unthread the four bottom screws securing the outer door panel.
7
Next, unthread the two upper screws securing the door handle and the inner panel assembly.
8
Set the handle aside.
9
Separate the inner door assembly from the outer panel.
10
You can now slide off the old door trim.
11
Install the new top oven door trim by sliding it onto the outer door panel.
12
Join the inner door assembly and the outer door panel together.
13
Realign the handle and fully thread the upper screws to secure it.
14
Replace the four bottom screws.
15
Reinstall the oven door by inserting the door hinges into the hinge slots at a 45-degree angle.
16
Lower the door to its fully open position, then rotate the hinge locks forward.
17
Plug the power cord back in or restore the power supply, and your gas range should be ready for use.
Applicable Product Model
Related Articles & Videos
01:25
Part Replacement
Frigidaire Gas Range Right Front Burner Base Replacement (316438400)
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com