Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairElectrolux Front-Load Washer Tub Pulley Replacement (part 5304514822)
Electrolux Front-Load Washer Tub Pulley Replacement (part 5304514822)
Skill Level
Total Parts Cost
$135.82Estimated Savings
$112.5002:48
- Description
This video provides step-by-step instructions for replacing the tub pulley on Electrolux washing machine. The most common reason for replacing the tub pulley is when the washing machine won't agitate.
All of the information in this tub pulley replacement video is applicable to the following brands: Electrolux
Tools used: Phillips-head screwdriver or Number two square drive bit, 11/16th inch socket or wrench.
All of the information in this tub pulley replacement video is applicable to the following brands: Electrolux
Tools used: Phillips-head screwdriver or Number two square drive bit, 11/16th inch socket or wrench.
Step By Step Instructions
1
Electrolux Front-Load Washer - Model EFLS627UTT
2
Front-Load Washer Tub Pulley Replacement
3
Tools & Assistance Needed
4
"You will need a Philips-head screwdriver, a support, and an 11/16th inch socket or wrench for this procedure, and you may need assistance."
5
Be sure to unplug the power cord.
6
Have an assistant help you to move the appliance away from the wall.
7
"Using a Philips-head screwdriver or a number two square drive bit, unthread the six screws securing the rear access panel."
8
The bottom screw doesn’t need to be full unthreaded.
9
Set the panel aside.
10
"Note the position of the tub belt on the motor pulley, then rotate the tub pulley to help remove the belt."
11
"Use a support to prevent the tub pulley from rotating, then use an 11/16th inch socket or wrench to unthread the mounting bolt."
12
Detach the old pulley from the tub shaft.
13
Install the new tub pulley by aligning it on the shaft.
14
Secure the pulley then thread and tighten the mounting bolt.
15
"With the grooved-side facing inward, realign the belt on the motor pulley, then loop it onto the new tub pulley."
16
Rotate the pulley to help align the belt.
17
Reinstall the rear access panel.
18
Move the appliance back against the wall.
19
Plug the power cord back in.
20
Congrats! Your front-load washer is ready for use.
Description
This video provides step-by-step instructions for replacing the tub pulley on Electrolux washing machine. The most common reason for replacing the tub pulley is when the washing machine won't agitate.
All of the information in this tub pulley replacement video is applicable to the following brands: Electrolux
Tools used: Phillips-head screwdriver or Number two square drive bit, 11/16th inch socket or wrench.
All of the information in this tub pulley replacement video is applicable to the following brands: Electrolux
Tools used: Phillips-head screwdriver or Number two square drive bit, 11/16th inch socket or wrench.
Step-By-Step Instructions
1
Electrolux Front-Load Washer - Model EFLS627UTT
2
Front-Load Washer Tub Pulley Replacement
3
Tools & Assistance Needed
4
"You will need a Philips-head screwdriver, a support, and an 11/16th inch socket or wrench for this procedure, and you may need assistance."
5
Be sure to unplug the power cord.
6
Have an assistant help you to move the appliance away from the wall.
7
"Using a Philips-head screwdriver or a number two square drive bit, unthread the six screws securing the rear access panel."
8
The bottom screw doesn’t need to be full unthreaded.
9
Set the panel aside.
10
"Note the position of the tub belt on the motor pulley, then rotate the tub pulley to help remove the belt."
11
"Use a support to prevent the tub pulley from rotating, then use an 11/16th inch socket or wrench to unthread the mounting bolt."
12
Detach the old pulley from the tub shaft.
13
Install the new tub pulley by aligning it on the shaft.
14
Secure the pulley then thread and tighten the mounting bolt.
15
"With the grooved-side facing inward, realign the belt on the motor pulley, then loop it onto the new tub pulley."
16
Rotate the pulley to help align the belt.
17
Reinstall the rear access panel.
18
Move the appliance back against the wall.
19
Plug the power cord back in.
20
Congrats! Your front-load washer is ready for use.
Related Articles & Videos
07:53
Part Replacement
Electrolux Front-Load Washer Door Boot Seal Replacement (part 5304505004)
08:08
Part Replacement
Electrolux Front-Load Washer Sump Filter Replacement (part 5304505165)
06:59
Part Replacement
Electrolux Front-Load Washer Drain Pump Assembly Replacement (part 5304514775)
04:11
Part Replacement
Electrolux Front-Load Washer Water Valve Assembly Replacement (part 5304514790)
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com