DescriptionThis video provides step-by-step instructions for replacing the door latch on Electrolux washing machines.
All of the information in this video is applicable to the following brands: Electrolux
Tools used: Phillips-head screwdriver or Number two square drive bit, T-20 Torx bit, half-inch deep-well socket, & needle-nose pliers.
Step-By-Step Instructions1
Electrolux Front-Load Washer - Model EFLS627UTT
2
Front-Load Washer Door Latch Replacement
4
You will need a Philips-head screwdriver (or a number two square drive bit) for this procedure.
5
Use a Philips-head screwdriver or a number two square drive bit to unthread the two mounting screws securing the latch to the inner door panel.
6
"Install the new door latch by positioning it in the inner door panel, then thread the mounting screws to secure."
7
"With the new latch installed, confirm the door closes and latches properly."
8
Congrats! Your front-load washer is ready for use.