Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairElectrolux Dishwasher Top Rack Rail Stop Clip Replacement 807070701 
Electrolux Dishwasher Top Rack Rail Stop Clip Replacement 807070701
Skill Level
Total Parts Cost
$67.00Estimated Savings
$112.5001:27
- Description
This video provides step-by-step instructions for replacing the top rack rail stop clip on Electrolux dishwashers.
All of the information in this video is applicable to the following brands: Electrolux
All of the information in this video is applicable to the following brands: Electrolux
Step By Step Instructions
1
To replace a top utensil rack rails stop clip in your dishwasher,
2
Pull the top rack out.
3
If replacing a front stop clip, release the retaining tabs to remove the clip from the rail.
4
If you're replacing a rear stop clip, remove both front stop clips and slide the rack off of the rails.
5
You can now release the retaining tabs to remove the appropriate rear stop clip.
6
Install the new top rack rails stop clip by aligning it on the rail and snapping it into place.
7
If applicable, realign the utensil trace support brackets on the rails and slide the rack in.
8
Realign the two front stop clips on the rails and snap them into place.
Description
This video provides step-by-step instructions for replacing the top rack rail stop clip on Electrolux dishwashers.
All of the information in this video is applicable to the following brands: Electrolux
All of the information in this video is applicable to the following brands: Electrolux
Step-By-Step Instructions
1
To replace a top utensil rack rails stop clip in your dishwasher,
2
Pull the top rack out.
3
If replacing a front stop clip, release the retaining tabs to remove the clip from the rail.
4
If you're replacing a rear stop clip, remove both front stop clips and slide the rack off of the rails.
5
You can now release the retaining tabs to remove the appropriate rear stop clip.
6
Install the new top rack rails stop clip by aligning it on the rail and snapping it into place.
7
If applicable, realign the utensil trace support brackets on the rails and slide the rack in.
8
Realign the two front stop clips on the rails and snap them into place.
Applicable Product Model
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com