DescriptionThis video provides step-by-step instructions for replacing the door latch on Electrolux dishwashers.
All of the information in this video is applicable to the following brands: Electrolux
Step-By-Step Instructions1
Electrolux Dishwasher - 24ID75SPS3A
2
2, 1, 3",Dishwasher Door Latch Replacement
3
Turn the power off to the appliance
4
You will need a phillips-head screwdriver
5
"Open the dishwasher door and use the phillips-head screwdriver to unthread all of the screws holding the inner and outer door panels together--note the location of each screw, being sure to remove the top middle right screw last"
6
Slide the outer door panel up to detach
7
Lift off the control panel and fully remove the outer panel
8
Disconnect the wire connector from the door latch and rest the control panel on the floor
9
Unthread the two mounting screws to release the old door latch
10
Position the new door latch on the inner door panel then thread the mounting screws
11
Reinstall the outer door panel by repositioning the control panel
12
Connect the wire connector to the latch
13
"Slide the outer panel onto the inner panel, making sure the lower tabs rest behind the hinges"
14
Replace all of the screws in the appropriate location starting with the long top middle right screw
15
Turn the power back on for the appliance
16
Confirm the door closes and latches properly