Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairHonda Small Engine Breather Tube Replacement #15721-Z8B-900
Honda Small Engine Breather Tube Replacement #15721-Z8B-900
Skill Level
Total Parts Cost
$6.98Estimated Savings
$112.5001:17
- Description
This video provides step-by-step instructions for replacing the breather tube on Honda small engines. The most common reason for replacing this part is if the engine will not run properly.
All of the information in this video is applicable to the following brands: Honda
All of the information in this video is applicable to the following brands: Honda
Step By Step Instructions
1
To replace the air filter housing breather tube on your Honda engine, you will need a small flat head screwdriver.
2
Before you begin the procedure, make sure the engine has cooled.
3
If still intact, pull the old tube out of the breather cover plate, then detach it from the air filter housing port.
4
To install the new breather tube, attach one end to the filter housing port, then use the small flathead screwdriver to help insert the opposite end into the hole in the breather cover plate.
5
Approximately a quarter inch of the tube should be inserted into the hole.
Description
This video provides step-by-step instructions for replacing the breather tube on Honda small engines. The most common reason for replacing this part is if the engine will not run properly.
All of the information in this video is applicable to the following brands: Honda
All of the information in this video is applicable to the following brands: Honda
Step-By-Step Instructions
1
To replace the air filter housing breather tube on your Honda engine, you will need a small flat head screwdriver.
2
Before you begin the procedure, make sure the engine has cooled.
3
If still intact, pull the old tube out of the breather cover plate, then detach it from the air filter housing port.
4
To install the new breather tube, attach one end to the filter housing port, then use the small flathead screwdriver to help insert the opposite end into the hole in the breather cover plate.
5
Approximately a quarter inch of the tube should be inserted into the hole.
Applicable Product Model
Parts Needed
Breather Tube
$6.98
Total$0.00
Related Articles & Videos
02:55
Part Replacement
Honda Small Engine Fuel Tank Mounting Clip Replacement #17516-Z8B-900ZA
03:57
Part Replacement
Honda Small Engine Carburetor-To-Shut-Off Fuel Line Replacement #16840-Z8B-900
01:44
Part Replacement
Honda Small Engine Shut-Off-To-Tank Fuel Line Replacement #17700-Z8B-900
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com