Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairHonda Small Engine Oil Filler Tube O-ring Replacement #91356-MA6-005
Honda Small Engine Oil Filler Tube O-ring Replacement #91356-MA6-005
Skill Level
Total Parts Cost
$2.80Estimated Savings
$112.5002:13
- Description
This video provides step-by-step instructions for replacing the oil filler tube O-ring on Honda small engines. The most common reason for replacing this part is if the engine is leaking oil.
All of the information in this video is applicable to the following brands: Honda
All of the information in this video is applicable to the following brands: Honda
Step By Step Instructions
1
To replace the oil filler tube o-ring on your Honda engine, you will need a small flat-head screwdriver, a mallet, and channel lock pliers.
2
Before you begin the procedure, make sure the engine has cooled.
3
Unthread the oil dipstick and set it aside.
4
Use the small flathead screwdriver and the mallet to bend the oil filler 2 block plate retaining tabs outward.
5
Fully unthread the oil filler extension tube and remove the old o-ring, if still intact.
6
To install the new oil filler tube o-ring, slide it onto the threaded end of the tube.
7
Reposition the lock plate on the engine housing, then re-thread the oil filler tube, keeping the flat sides of the base aligned with the lock plate tabs.
8
Using the channel lock pliers, bend the plate tabs inward to fully secure the tube.
9
Replace the dipstick and your engine should be ready for use.
Description
This video provides step-by-step instructions for replacing the oil filler tube O-ring on Honda small engines. The most common reason for replacing this part is if the engine is leaking oil.
All of the information in this video is applicable to the following brands: Honda
All of the information in this video is applicable to the following brands: Honda
Step-By-Step Instructions
1
To replace the oil filler tube o-ring on your Honda engine, you will need a small flat-head screwdriver, a mallet, and channel lock pliers.
2
Before you begin the procedure, make sure the engine has cooled.
3
Unthread the oil dipstick and set it aside.
4
Use the small flathead screwdriver and the mallet to bend the oil filler 2 block plate retaining tabs outward.
5
Fully unthread the oil filler extension tube and remove the old o-ring, if still intact.
6
To install the new oil filler tube o-ring, slide it onto the threaded end of the tube.
7
Reposition the lock plate on the engine housing, then re-thread the oil filler tube, keeping the flat sides of the base aligned with the lock plate tabs.
8
Using the channel lock pliers, bend the plate tabs inward to fully secure the tube.
9
Replace the dipstick and your engine should be ready for use.
Applicable Product Model
Parts Needed
O-Ring
$2.80
Total$0.00
Related Articles & Videos
03:57
Part Replacement
Honda Small Engine Carburetor-To-Shut-Off Fuel Line Replacement #16840-Z8B-900
01:44
Part Replacement
Honda Small Engine Shut-Off-To-Tank Fuel Line Replacement #17700-Z8B-900
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com