Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairCub Cadet Chipper Shredder Tow Bar Bracket Replacement (681-0134B)
Cub Cadet Chipper Shredder Tow Bar Bracket Replacement (681-0134B)
Skill Level
Total Parts Cost
$93.68Estimated Savings
$112.5003:18
- Description
This video provides step-by-step instructions for replacing the tow bar bracket on a Cub Cadet Chipper Shredder. The most common reason to replace this part is if it is damaged or missing.
All of the information in this video is applicable to the following brands: Cub Cadet
All of the information in this video is applicable to the following brands: Cub Cadet
Step By Step Instructions
1
Cub Cadet Chipper Shredder - 24A424M710
2
Chipper Shredder Tow Bar Mounting Bracket Replacement
3
"Sharp, Spill, Hot, Heavy"
4
"You will need a half-inch socket with an extension, a 9/16th inch socket and a 9/16th inch wrench"
5
Heavy
6
Slide out the clevis pin and remove the bar
7
Tip the chipper shredder so it rests on the discharge chute
8
Use the half-inch socket with the extension to unthread the bolt securing the tow bar mounting bracket to the motor mounting base
9
Use the 9/16th inch socket and the wrench to unthread the two nuts and bolts securing the bracket
10
Set the old bracket aside
11
Align the new tow bar mounting bracket on the base and insert the front bolts
12
Slide on the washers and thread the nuts loosely
13
"Holding the bracket up, thread and tighten the bolt to secure the bracket"
14
Tighten the nuts on the two front bolts
15
Return the chipper shredder to its upright position
16
"Keeping the hitch plates tilted downward, insert the tow bar into the new mounting bracket"
17
Slide in the clevis pin and secure it with the retaining pin
Description
This video provides step-by-step instructions for replacing the tow bar bracket on a Cub Cadet Chipper Shredder. The most common reason to replace this part is if it is damaged or missing.
All of the information in this video is applicable to the following brands: Cub Cadet
All of the information in this video is applicable to the following brands: Cub Cadet
Step-By-Step Instructions
1
Cub Cadet Chipper Shredder - 24A424M710
2
Chipper Shredder Tow Bar Mounting Bracket Replacement
3
"Sharp, Spill, Hot, Heavy"
4
"You will need a half-inch socket with an extension, a 9/16th inch socket and a 9/16th inch wrench"
5
Heavy
6
Slide out the clevis pin and remove the bar
7
Tip the chipper shredder so it rests on the discharge chute
8
Use the half-inch socket with the extension to unthread the bolt securing the tow bar mounting bracket to the motor mounting base
9
Use the 9/16th inch socket and the wrench to unthread the two nuts and bolts securing the bracket
10
Set the old bracket aside
11
Align the new tow bar mounting bracket on the base and insert the front bolts
12
Slide on the washers and thread the nuts loosely
13
"Holding the bracket up, thread and tighten the bolt to secure the bracket"
14
Tighten the nuts on the two front bolts
15
Return the chipper shredder to its upright position
16
"Keeping the hitch plates tilted downward, insert the tow bar into the new mounting bracket"
17
Slide in the clevis pin and secure it with the retaining pin
Applicable Product Model
Parts Needed
Mounting Bracket
$93.68
Total$0.00
Related Articles & Videos
09:46
Part Replacement
Cub Cadet Chipper Shredder Impeller Assembly Replacement (981-04094)
14:48
Part Replacement
Cub Cadet Chipper Shredder Inner Flail Housing Replacement (681050634021)
03:13
Part Replacement
Cub Cadet Chipper Shredder Upper Chute Hinge Replacement (981-04032)
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com