Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairCub Cadet Chipper Shredder Chute Torsion Spring Replacement (932-04167)
Cub Cadet Chipper Shredder Chute Torsion Spring Replacement (932-04167)
Skill Level
Total Parts Cost
$12.32Estimated Savings
$112.5001:56
- Description
This video provides step-by-step instructions for replacing the chute torsion spring on a Cub Cadet Chipper Shredder. The most common reason to replace this part is if it is damaged or missing.
All of the information in this video is applicable to the following brands: Cub Cadet
All of the information in this video is applicable to the following brands: Cub Cadet
Step By Step Instructions
1
Chipper - 24A424MM710
2
Chipper Shredder Chute Torsion Spring Replacement
3
You will need a 9/16th inch socket and an adjustable wrench
4
Place a towel or blanket into the hopper to prevent the nut from falling
5
Use the 9/16th inch socket to secure the nut and unthread the torsion spring shoulder bolt using the adjustable wrench
6
You will need to confirm the flat washer is aligned on the shoulder bold before continuing.
7
Slide the spring onto the bolt with the longer end facing outward.
8
Align the waver washer on the bild with the curved side facing the spring.
9
"At the same time, insert the short end of the string through the hole in the lip and insert the bold through the hole in the panel."
10
Thread and tighten the nut.
11
Remove the towel or blanket.
Description
This video provides step-by-step instructions for replacing the chute torsion spring on a Cub Cadet Chipper Shredder. The most common reason to replace this part is if it is damaged or missing.
All of the information in this video is applicable to the following brands: Cub Cadet
All of the information in this video is applicable to the following brands: Cub Cadet
Step-By-Step Instructions
1
Chipper - 24A424MM710
2
Chipper Shredder Chute Torsion Spring Replacement
3
You will need a 9/16th inch socket and an adjustable wrench
4
Place a towel or blanket into the hopper to prevent the nut from falling
5
Use the 9/16th inch socket to secure the nut and unthread the torsion spring shoulder bolt using the adjustable wrench
6
You will need to confirm the flat washer is aligned on the shoulder bold before continuing.
7
Slide the spring onto the bolt with the longer end facing outward.
8
Align the waver washer on the bild with the curved side facing the spring.
9
"At the same time, insert the short end of the string through the hole in the lip and insert the bold through the hole in the panel."
10
Thread and tighten the nut.
11
Remove the towel or blanket.
Applicable Product Model
Parts Needed
Spring
$12.32
Total$0.00
Related Articles & Videos
09:46
Part Replacement
Cub Cadet Chipper Shredder Impeller Assembly Replacement (981-04094)
14:48
Part Replacement
Cub Cadet Chipper Shredder Inner Flail Housing Replacement (681050634021)
03:13
Part Replacement
Cub Cadet Chipper Shredder Upper Chute Hinge Replacement (981-04032)
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com