Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairCub Cadet Chipper Shredder Inlet Guide Replacement (781-04033-4021)
Cub Cadet Chipper Shredder Inlet Guide Replacement (781-04033-4021)
Skill Level
Total Parts Cost
$56.34Estimated Savings
$112.5004:45
- Description
This video provides step-by-step instructions for replacing the inlet guide on a Cub Cadet Chipper Shredder. The most common reason to replace this part is if it is damaged or missing.
All of the information in this video is applicable to the following brands: Cub Cadet
All of the information in this video is applicable to the following brands: Cub Cadet
Step By Step Instructions
1
Cub Cadet Chipper Shredder - 24A424M710
2
Chipper Shredder Inlet Guide Replacement
3
"Sharp, Spill, Hot, Heavy"
4
"You will need a half-inch wrench and socket, a 7/16th inch wrench, and a 3/8th inch socket"
5
"Using the half-inch socket, unthread the six mounting nuts securing the front of the hopper assembly"
6
Heavy
7
Tilt the hopper assembly back and lift up to fully detach the assembly from the bolts
8
Set the assembly upside down on a towel or blanket
9
Use 7/16th inch wrench and the 3/8th inch socket to unthread the six nuts and bolts securing the inlet guide to the hopper
10
Detach the old inlet guide
11
Position the new inlet guide on the hopper and thread the six nuts and bolts
12
Confirm the shredder plate is intact
13
"Reinstall the hopper assembly by aligning the support plate on the two upper mounting bolts first, then rotate the assembly to align it on the impeller housing bolts"
Description
This video provides step-by-step instructions for replacing the inlet guide on a Cub Cadet Chipper Shredder. The most common reason to replace this part is if it is damaged or missing.
All of the information in this video is applicable to the following brands: Cub Cadet
All of the information in this video is applicable to the following brands: Cub Cadet
Step-By-Step Instructions
1
Cub Cadet Chipper Shredder - 24A424M710
2
Chipper Shredder Inlet Guide Replacement
3
"Sharp, Spill, Hot, Heavy"
4
"You will need a half-inch wrench and socket, a 7/16th inch wrench, and a 3/8th inch socket"
5
"Using the half-inch socket, unthread the six mounting nuts securing the front of the hopper assembly"
6
Heavy
7
Tilt the hopper assembly back and lift up to fully detach the assembly from the bolts
8
Set the assembly upside down on a towel or blanket
9
Use 7/16th inch wrench and the 3/8th inch socket to unthread the six nuts and bolts securing the inlet guide to the hopper
10
Detach the old inlet guide
11
Position the new inlet guide on the hopper and thread the six nuts and bolts
12
Confirm the shredder plate is intact
13
"Reinstall the hopper assembly by aligning the support plate on the two upper mounting bolts first, then rotate the assembly to align it on the impeller housing bolts"
Applicable Product Model
Parts Needed
Side Panel
$56.34
Total$0.00
Related Articles & Videos
09:46
Part Replacement
Cub Cadet Chipper Shredder Impeller Assembly Replacement (981-04094)
14:48
Part Replacement
Cub Cadet Chipper Shredder Inner Flail Housing Replacement (681050634021)
03:13
Part Replacement
Cub Cadet Chipper Shredder Upper Chute Hinge Replacement (981-04032)
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com