Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairCub Cadet Chipper Shredder Chute Support Replacement (749-1004-0637)
Cub Cadet Chipper Shredder Chute Support Replacement (749-1004-0637)
Skill Level
Total Parts Cost
$26.29Estimated Savings
$112.5004:15
- Description
This video provides step-by-step instructions for replacing the chute support on a Cub Cadet Chipper Shredder. The most common reason to replace this part is if it is damaged or missing.
All of the information in this video is applicable to the following brands: Cub Cadet
All of the information in this video is applicable to the following brands: Cub Cadet
Step By Step Instructions
1
Cub Cadet Chipper Shredder - 24A424M710
2
Chipper Shredder Chute Support Replacement
3
You will need a 7/16th inch wrench and socket and a 3/8th inch socket
4
"With the chute in the locked position, place a towel at the bottom of the chute to prevent the chute mounting bolts from falling"
5
"Reaching into the chute, use the 7/16th inch wrench to secure the bolt and the 7/16th inch socket to unthread the nut"
6
Repeat for the second nut and bolt
7
Pull the lock rod out to fully release the upper chute
8
Use the 7/16th inch wrench and socket to remove the two nuts and bolts securing the lower chute to the support
9
Use the 3/8th inch socket to unthread the bold securing the support and fully remove the support
10
Confirm the washers are on the mounting bolts
11
Align the support on the base then thread and tighten the bolts
12
Insert the two bolts which secure the lower chute to the support -- the shorter goes in the front
13
Slide the washer onto the rear bolt then thread and tighten the nut
14
"Align the upper chute on the lower chute, snapping the lock rod in place"
15
Thread and tighten the nut on the front bolt
16
"Insert the two mounting bolts from inside the chute, then thread and tighten the nuts"
17
"Finally, remove the towel"
Description
This video provides step-by-step instructions for replacing the chute support on a Cub Cadet Chipper Shredder. The most common reason to replace this part is if it is damaged or missing.
All of the information in this video is applicable to the following brands: Cub Cadet
All of the information in this video is applicable to the following brands: Cub Cadet
Step-By-Step Instructions
1
Cub Cadet Chipper Shredder - 24A424M710
2
Chipper Shredder Chute Support Replacement
3
You will need a 7/16th inch wrench and socket and a 3/8th inch socket
4
"With the chute in the locked position, place a towel at the bottom of the chute to prevent the chute mounting bolts from falling"
5
"Reaching into the chute, use the 7/16th inch wrench to secure the bolt and the 7/16th inch socket to unthread the nut"
6
Repeat for the second nut and bolt
7
Pull the lock rod out to fully release the upper chute
8
Use the 7/16th inch wrench and socket to remove the two nuts and bolts securing the lower chute to the support
9
Use the 3/8th inch socket to unthread the bold securing the support and fully remove the support
10
Confirm the washers are on the mounting bolts
11
Align the support on the base then thread and tighten the bolts
12
Insert the two bolts which secure the lower chute to the support -- the shorter goes in the front
13
Slide the washer onto the rear bolt then thread and tighten the nut
14
"Align the upper chute on the lower chute, snapping the lock rod in place"
15
Thread and tighten the nut on the front bolt
16
"Insert the two mounting bolts from inside the chute, then thread and tighten the nuts"
17
"Finally, remove the towel"
Applicable Product Model
Parts Needed
Support Bracket
$26.29
Total$0.00
Related Articles & Videos
09:46
Part Replacement
Cub Cadet Chipper Shredder Impeller Assembly Replacement (981-04094)
14:48
Part Replacement
Cub Cadet Chipper Shredder Inner Flail Housing Replacement (681050634021)
03:13
Part Replacement
Cub Cadet Chipper Shredder Upper Chute Hinge Replacement (981-04032)
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com