Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairCub Cadet Chipper Shredder Support Tube Replacement (749-04104-0637)
Cub Cadet Chipper Shredder Support Tube Replacement (749-04104-0637)
Skill Level
Total Parts Cost
$29.59Estimated Savings
$112.5004:14
- Description
This video provides step-by-step instructions for replacing the support tube on a Cub Cadet Chipper Shredder. The most common reason to replace this part is if it is damaged or bent.
All of the information in this video is applicable to the following brands: Cub Cadet
All of the information in this video is applicable to the following brands: Cub Cadet
Step By Step Instructions
1
Cub Cadet Chipper Shredder - 24A424M710
2
Chipper Shredder Support Tube Replacement
3
"Sharp, Spill, Hot, Heavy"
4
"You will need a half-inch socket and wrench, a small gear puller, a mallet and a wood support"
5
Heavy
6
Lift the rear of the chipper shredder and use the supports to prop it up
7
You can use the half-inch socket and the small gear puller to detach the push cap securing a wheel assembly
8
With the push cap fully detached you can slide off the wheel assembly
9
"With the tow bar installed, tip the chipper shredder back and set a weight on the tow bar to hold it down"
10
Use the half-inch wrench to secure a support tube mounting bolt and the half-inch socket to unthread the nut
11
Repeat for the remaining three nuts and bolts
12
Align the new support tube on the base and insert the four mounting bolts
13
Slide on the washers then thread and tighten the nuts to secure
14
Return the chipper shredder to its upright position on the wood supports
15
"Confirm the spacer is on the axle, then slide on the wheel assembly"
16
Align the push cap on the end of the axle and use the mallet to secure
17
Remove the wood supports
Description
This video provides step-by-step instructions for replacing the support tube on a Cub Cadet Chipper Shredder. The most common reason to replace this part is if it is damaged or bent.
All of the information in this video is applicable to the following brands: Cub Cadet
All of the information in this video is applicable to the following brands: Cub Cadet
Step-By-Step Instructions
1
Cub Cadet Chipper Shredder - 24A424M710
2
Chipper Shredder Support Tube Replacement
3
"Sharp, Spill, Hot, Heavy"
4
"You will need a half-inch socket and wrench, a small gear puller, a mallet and a wood support"
5
Heavy
6
Lift the rear of the chipper shredder and use the supports to prop it up
7
You can use the half-inch socket and the small gear puller to detach the push cap securing a wheel assembly
8
With the push cap fully detached you can slide off the wheel assembly
9
"With the tow bar installed, tip the chipper shredder back and set a weight on the tow bar to hold it down"
10
Use the half-inch wrench to secure a support tube mounting bolt and the half-inch socket to unthread the nut
11
Repeat for the remaining three nuts and bolts
12
Align the new support tube on the base and insert the four mounting bolts
13
Slide on the washers then thread and tighten the nuts to secure
14
Return the chipper shredder to its upright position on the wood supports
15
"Confirm the spacer is on the axle, then slide on the wheel assembly"
16
Align the push cap on the end of the axle and use the mallet to secure
17
Remove the wood supports
Applicable Product Model
Parts Needed
Tube
$29.59
Total$0.00
Related Articles & Videos
09:46
Part Replacement
Cub Cadet Chipper Shredder Impeller Assembly Replacement (981-04094)
14:48
Part Replacement
Cub Cadet Chipper Shredder Inner Flail Housing Replacement (681050634021)
03:13
Part Replacement
Cub Cadet Chipper Shredder Upper Chute Hinge Replacement (981-04032)
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com