Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairCub Cadet Chipper Shredder Chute Flap Replacement (735-0249A)
Cub Cadet Chipper Shredder Chute Flap Replacement (735-0249A)
Skill Level
Total Parts Cost
$12.85Estimated Savings
$112.5001:40
- Description
This video provides step-by-step instructions for replacing the chute flap on a Cub Cadet Chipper Shredder. The most common reason to replace this part is if it is damaged or missing.
All of the information in this video is applicable to the following brands: Cub Cadet
All of the information in this video is applicable to the following brands: Cub Cadet
Step By Step Instructions
1
Cub Cadet Chipper Shredder - 24A424M710
2
Chipper Shredder Chute Flap Replacement
3
"You will need a pair of needle-nose pliers, a power drill with a 5/32nd inch drill bit and a rivet gun"
4
"Using the needle-nose pliers to secure the rivets, use the power drill to drill out the three rivets to release the old flap and backing plate if still intact"
5
"With a new rivet positioned in the gun, insert the rivet through the middle hole then align the flap on the inside of the chute along with the backing plate"
6
Pump the rivet gun handle to secure the middle rivet
7
Repeat to secure the left and right sides of the flap
8
Confirm the new flap moves freely in the chute
Description
This video provides step-by-step instructions for replacing the chute flap on a Cub Cadet Chipper Shredder. The most common reason to replace this part is if it is damaged or missing.
All of the information in this video is applicable to the following brands: Cub Cadet
All of the information in this video is applicable to the following brands: Cub Cadet
Step-By-Step Instructions
1
Cub Cadet Chipper Shredder - 24A424M710
2
Chipper Shredder Chute Flap Replacement
3
"You will need a pair of needle-nose pliers, a power drill with a 5/32nd inch drill bit and a rivet gun"
4
"Using the needle-nose pliers to secure the rivets, use the power drill to drill out the three rivets to release the old flap and backing plate if still intact"
5
"With a new rivet positioned in the gun, insert the rivet through the middle hole then align the flap on the inside of the chute along with the backing plate"
6
Pump the rivet gun handle to secure the middle rivet
7
Repeat to secure the left and right sides of the flap
8
Confirm the new flap moves freely in the chute
Applicable Product Model
Parts Needed
Guard
$12.85
Total$0.00
Related Articles & Videos
09:46
Part Replacement
Cub Cadet Chipper Shredder Impeller Assembly Replacement (981-04094)
14:48
Part Replacement
Cub Cadet Chipper Shredder Inner Flail Housing Replacement (681050634021)
03:13
Part Replacement
Cub Cadet Chipper Shredder Upper Chute Hinge Replacement (981-04032)
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com