Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairCub Cadet Chipper Shredder Push Cap Replacement (726-0214)
Cub Cadet Chipper Shredder Push Cap Replacement (726-0214)
Skill Level
Total Parts Cost
$10.59Estimated Savings
$112.5002:03
- Description
This video provides step-by-step instructions for replacing the push cap on a Cub Cadet Chipper Shredder. The most common reason to replace this part is if it is damaged or missing.
All of the information in this video is applicable to the following brands: Cub Cadet
All of the information in this video is applicable to the following brands: Cub Cadet
Step By Step Instructions
1
Cub Cadet Chipper Shredder - 24A424M710
2
Chipper Shredder Wheel Push Cap Replacement
3
"Sharp, Spill, Hot, Heavy"
4
"You will need a half-inch socket, a small gear puller, a mallet, and wood supports"
5
Lift the rear of the chipper shredder and use the supports to prop it up
6
Use the half-inch socket and the small gear puller to detach the old push cap
7
Install the new push cap and align it on the end of the axle
8
Hold the cap and axle on the opposite side in place and use the mallet to fully secure the new cap
9
Remove the wood supports
Description
This video provides step-by-step instructions for replacing the push cap on a Cub Cadet Chipper Shredder. The most common reason to replace this part is if it is damaged or missing.
All of the information in this video is applicable to the following brands: Cub Cadet
All of the information in this video is applicable to the following brands: Cub Cadet
Step-By-Step Instructions
1
Cub Cadet Chipper Shredder - 24A424M710
2
Chipper Shredder Wheel Push Cap Replacement
3
"Sharp, Spill, Hot, Heavy"
4
"You will need a half-inch socket, a small gear puller, a mallet, and wood supports"
5
Lift the rear of the chipper shredder and use the supports to prop it up
6
Use the half-inch socket and the small gear puller to detach the old push cap
7
Install the new push cap and align it on the end of the axle
8
Hold the cap and axle on the opposite side in place and use the mallet to fully secure the new cap
9
Remove the wood supports
Applicable Product Model
Parts Needed
Push Cap
$10.59
Total$0.00
Related Articles & Videos
09:46
Part Replacement
Cub Cadet Chipper Shredder Impeller Assembly Replacement (981-04094)
14:48
Part Replacement
Cub Cadet Chipper Shredder Inner Flail Housing Replacement (681050634021)
03:13
Part Replacement
Cub Cadet Chipper Shredder Upper Chute Hinge Replacement (981-04032)
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com