Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairFrigidaire Induction Range Fan Assembly Replacement 5304511092 
Frigidaire Induction Range Fan Assembly Replacement 5304511092
Skill Level
Total Parts Cost
$194.91Estimated Savings
$112.5004:58
- Description
This video provides step-by-step repair instructions for replacing the fan assembly on a Frigidaire induction range. The most common reason for replacing this part is if the fan will not power on.
All of the information for this part replacement video is applicable to the following brands:
Frigidaire
All of the information for this part replacement video is applicable to the following brands:
Frigidaire
Step By Step Instructions
1
Frigidaire Induction Range - GCRI3058AFD
2
Frigidaire Induction Range Fan Assembly Replacement
3
Tools needed: Phillips-head screwdriver, quarter-inch nut driver
4
Shock
5
Before you begin the procedure, unplug the power cord.
6
Heavy
7
Have an assistant help you to move the range away from the wall.
8
Use the quarter-inch nut driver to unthread the six screws securing the upper rear access panel.
9
Sharp
10
Set the panel aside.
11
Disconnect the two wires from the fan assembly.
12
Open the oven door and use the Phillips-head screwdriver to unthread the three screws securing the main top.
13
Heavy
14
With the screws unthreaded, pull the main top forward to fully remove.
15
You can now use the quarter-inch nut driver to unthread the four mounting screws to release the old fan assembly from the support panel.
16
Sharp
17
To prepare the new fan asssembly for installation, transfer the four foam strips from the old assembly to the new one.
18
With the terminals facing up on the left side, position the new assembly on the support panel and thread the four screws to secure.
19
Reinstall the main top by aligning the sides under the front support bracket, then carefully slide the top back, pressing the induction coils down as you do this.
20
With the main top in place, rethread the three screws in front.
21
Returning to the rear of the appliance, connect the wires to the terminals on the new fan assembly.
22
Reinstall the upper rear access panel by sliding the tabs under the control panel, then thread the center screw first to hold it in place.
23
Replace the five additional screws to fully secure.
24
Move the appliance back against the wall.
25
Plug the power cord back in and the induction range should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the fan assembly on a Frigidaire induction range. The most common reason for replacing this part is if the fan will not power on.
All of the information for this part replacement video is applicable to the following brands:
Frigidaire
All of the information for this part replacement video is applicable to the following brands:
Frigidaire
Step-By-Step Instructions
1
Frigidaire Induction Range - GCRI3058AFD
2
Frigidaire Induction Range Fan Assembly Replacement
3
Tools needed: Phillips-head screwdriver, quarter-inch nut driver
4
Shock
5
Before you begin the procedure, unplug the power cord.
6
Heavy
7
Have an assistant help you to move the range away from the wall.
8
Use the quarter-inch nut driver to unthread the six screws securing the upper rear access panel.
9
Sharp
10
Set the panel aside.
11
Disconnect the two wires from the fan assembly.
12
Open the oven door and use the Phillips-head screwdriver to unthread the three screws securing the main top.
13
Heavy
14
With the screws unthreaded, pull the main top forward to fully remove.
15
You can now use the quarter-inch nut driver to unthread the four mounting screws to release the old fan assembly from the support panel.
16
Sharp
17
To prepare the new fan asssembly for installation, transfer the four foam strips from the old assembly to the new one.
18
With the terminals facing up on the left side, position the new assembly on the support panel and thread the four screws to secure.
19
Reinstall the main top by aligning the sides under the front support bracket, then carefully slide the top back, pressing the induction coils down as you do this.
20
With the main top in place, rethread the three screws in front.
21
Returning to the rear of the appliance, connect the wires to the terminals on the new fan assembly.
22
Reinstall the upper rear access panel by sliding the tabs under the control panel, then thread the center screw first to hold it in place.
23
Replace the five additional screws to fully secure.
24
Move the appliance back against the wall.
25
Plug the power cord back in and the induction range should be ready for use.
Applicable Product Model
Related Articles & Videos
06:43
Part Replacement
Frigidaire Induction Range Low-Voltage Wire Harness Replacement 5304522701
04:31
Part Replacement
Frigidaire Induction Range Oven Door Hinge Replacement 5304522696
06:12
Part Replacement
Frigidaire Induction Range Induction Module Replacement 5304527384
06:09
Part Replacement
Frigidaire Induction Range Convection Fan Motor Replacement 316256100
05:34
Part Replacement
Frigidaire Induction Range Outer Door Glass Replacement 316355601
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com