Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairFrigidaire Induction Range Air Wash Glass Replacement 316552801 
Frigidaire Induction Range Air Wash Glass Replacement 316552801
Skill Level
Total Parts Cost
$29.48Estimated Savings
$112.5004:31
- Description
This video provides step-by-step repair instructions for replacing the air wash glass on a Frigidaire induction range. The most common reason for replacing this part is if it is damaged or dirty.
All of the information for this part replacement video is applicable to the following brands:
Frigidaire
All of the information for this part replacement video is applicable to the following brands:
Frigidaire
Step By Step Instructions
1
Frigidaire Induction Range - GCRI3058AFD
2
Frigidaire Induction Range Air Wash Glass Replacement
3
Tools needed: Phillips-head screwdriver, flat-head screwdriver
4
Shock
5
Before you begin the procedure, unplug the power cord or shut off the power supply.
6
Fully open the oven door,then use the flat-head screwdriver to help rotate the hinge locks forward.
7
Heavy
8
Partially close the door, then lift and pull the door toward you to remove.
9
Set the door handle-side down on a towel or blanket.
10
Use the Phillips-head screwdriver to unthread the two mounting screws securing the door handle.
11
With the screws unthreaded, set the handle aside.
12
Next, unthread the four bottom screws securing the inner door panel assembly to the outer door panel.
13
Heavy
14
Separate the inner panel assembly from the outer panel.
15
Now unthread the two screws securing one of the air wash glass mounting brackets.
16
Set the bracket aside and you can remove the old air wash glass if still intact.
17
To install the new air wash glass, align the edge under the installed mounting bracket tabs, then reposition the uninstalled mounting bracket and thread the screws to secure.
18
Realign the inner door assembly with the outer door panel.
19
Rethread the four bottom screws.
20
Make sure the top edge of the assembly is accessible, then insert the door handle screws.
21
Align the handle and thread the screws into the handle to secure.
22
Reinstall the oven door by inserting the door hinges into the hinge slots at a forty-five degree angle.
23
Lower the door to its fully open position, then rotate the hinge locks back.
24
Plug the power cord back in or restore the power supply and the induction range should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the air wash glass on a Frigidaire induction range. The most common reason for replacing this part is if it is damaged or dirty.
All of the information for this part replacement video is applicable to the following brands:
Frigidaire
All of the information for this part replacement video is applicable to the following brands:
Frigidaire
Step-By-Step Instructions
1
Frigidaire Induction Range - GCRI3058AFD
2
Frigidaire Induction Range Air Wash Glass Replacement
3
Tools needed: Phillips-head screwdriver, flat-head screwdriver
4
Shock
5
Before you begin the procedure, unplug the power cord or shut off the power supply.
6
Fully open the oven door,then use the flat-head screwdriver to help rotate the hinge locks forward.
7
Heavy
8
Partially close the door, then lift and pull the door toward you to remove.
9
Set the door handle-side down on a towel or blanket.
10
Use the Phillips-head screwdriver to unthread the two mounting screws securing the door handle.
11
With the screws unthreaded, set the handle aside.
12
Next, unthread the four bottom screws securing the inner door panel assembly to the outer door panel.
13
Heavy
14
Separate the inner panel assembly from the outer panel.
15
Now unthread the two screws securing one of the air wash glass mounting brackets.
16
Set the bracket aside and you can remove the old air wash glass if still intact.
17
To install the new air wash glass, align the edge under the installed mounting bracket tabs, then reposition the uninstalled mounting bracket and thread the screws to secure.
18
Realign the inner door assembly with the outer door panel.
19
Rethread the four bottom screws.
20
Make sure the top edge of the assembly is accessible, then insert the door handle screws.
21
Align the handle and thread the screws into the handle to secure.
22
Reinstall the oven door by inserting the door hinges into the hinge slots at a forty-five degree angle.
23
Lower the door to its fully open position, then rotate the hinge locks back.
24
Plug the power cord back in or restore the power supply and the induction range should be ready for use.
Applicable Product Model
Related Articles & Videos
06:43
Part Replacement
Frigidaire Induction Range Low-Voltage Wire Harness Replacement 5304522701
04:31
Part Replacement
Frigidaire Induction Range Oven Door Hinge Replacement 5304522696
06:12
Part Replacement
Frigidaire Induction Range Induction Module Replacement 5304527384
06:09
Part Replacement
Frigidaire Induction Range Convection Fan Motor Replacement 316256100
05:34
Part Replacement
Frigidaire Induction Range Outer Door Glass Replacement 316355601
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com