Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairFrigidaire Induction Range Convection Fan Blade Nut Replacement 316136600 
Frigidaire Induction Range Convection Fan Blade Nut Replacement 316136600
Skill Level
Total Parts Cost
$16.60Estimated Savings
$112.5003:04
- Description
This video provides step-by-step repair instructions for replacing the convection fan balde nut on a Frigidaire induction range. The most common reason for replacing this part is if the fan is noisy.
All of the information for this part replacement video is applicable to the following brands:
Frigidaire
All of the information for this part replacement video is applicable to the following brands:
Frigidaire
Step By Step Instructions
1
Frigidaire Induction Range - GCRI3058AFD
2
Frigidaire Induction Range Convection Fan Blade Nut Replacement
3
Tools needed: Phillips-head screwdriver, flat-head screwdriver, adjustable wrench
4
Shock
5
Before you begin the procedure, unplug the power cord or shut off the power supply.
6
For easier access, you can remove the oven door by using the flat-head screwdriver to rotate the hinge locks forward.
7
Heavy
8
Partially close the door, then lift and pull the door toward you to remove.
9
Slide out the oven racks.
10
Use the Phillips-head screwdriver to unthread the two mounting screws to release the convection fan cover.
11
Sharp
12
Using the adjustable wrench, unthread the old nut securing the fan blade by rotating it clockwise if still intact.
13
To install the new convection fan blade mounting nut, thread it counter-clockwise onto the motor shaft then tighten.
14
Reintall the fan cover by aligning it over the element and fan blade then thread the two mounting screws to secure.
15
Replace the oven racks.
16
Reinstall the oven door by inserting the door hinges into the hinge slots at a forty-five degree angle.
17
Lower the door to its fully open position, then rotate the hinge locks back.
18
Plug the power cord back in or restore the power supply and the induction range should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the convection fan balde nut on a Frigidaire induction range. The most common reason for replacing this part is if the fan is noisy.
All of the information for this part replacement video is applicable to the following brands:
Frigidaire
All of the information for this part replacement video is applicable to the following brands:
Frigidaire
Step-By-Step Instructions
1
Frigidaire Induction Range - GCRI3058AFD
2
Frigidaire Induction Range Convection Fan Blade Nut Replacement
3
Tools needed: Phillips-head screwdriver, flat-head screwdriver, adjustable wrench
4
Shock
5
Before you begin the procedure, unplug the power cord or shut off the power supply.
6
For easier access, you can remove the oven door by using the flat-head screwdriver to rotate the hinge locks forward.
7
Heavy
8
Partially close the door, then lift and pull the door toward you to remove.
9
Slide out the oven racks.
10
Use the Phillips-head screwdriver to unthread the two mounting screws to release the convection fan cover.
11
Sharp
12
Using the adjustable wrench, unthread the old nut securing the fan blade by rotating it clockwise if still intact.
13
To install the new convection fan blade mounting nut, thread it counter-clockwise onto the motor shaft then tighten.
14
Reintall the fan cover by aligning it over the element and fan blade then thread the two mounting screws to secure.
15
Replace the oven racks.
16
Reinstall the oven door by inserting the door hinges into the hinge slots at a forty-five degree angle.
17
Lower the door to its fully open position, then rotate the hinge locks back.
18
Plug the power cord back in or restore the power supply and the induction range should be ready for use.
Applicable Product Model
Related Articles & Videos
06:43
Part Replacement
Frigidaire Induction Range Low-Voltage Wire Harness Replacement 5304522701
04:31
Part Replacement
Frigidaire Induction Range Oven Door Hinge Replacement 5304522696
06:12
Part Replacement
Frigidaire Induction Range Induction Module Replacement 5304527384
06:09
Part Replacement
Frigidaire Induction Range Convection Fan Motor Replacement 316256100
05:34
Part Replacement
Frigidaire Induction Range Outer Door Glass Replacement 316355601
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com