Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairFrigidaire Microwave Oven Power Cord Replacement 5304519339 
Frigidaire Microwave Oven Power Cord Replacement 5304519339
Skill Level
Total Parts Cost
$73.35Estimated Savings
$112.5004:15
- Description
This video provides step-by-step repair instructions for replacing the power cord on a Frigidaire microwave oven (Model FPMO227NUFA). The most common reason for replacing this part is if the microwave is not working at all.
All of the information for this video is applicable to the following brands:
Frigidaire
All of the information for this video is applicable to the following brands:
Frigidaire
Step By Step Instructions
1
Frigidaire Microwave Oven - FPMO227NUFA
2
Frigidaire Microwave Oven Power Cord Replacement
3
Tools needed: T-15 tamper-proof Torx bit, Phillips-head screwdriver, needle-nose pliers
4
Shock
5
Because of the high voltage and high current used by microwave ovens, be aware that repairing this appliance poses a substantial risk for injury or death if precautions are not taken.
6
You should always unplug the microwave before you attempt any disassembly.
7
Since high voltage capacitors used in microwaves may retain a charge even after the microwave has been unplugged, we recommend that only experienced professionals access and replace internal components.
8
Unthread the six rear screws securing the cover using the t-15 tamper-proof torx bit.
9
Unthread the screw on the right side of the cover as well.
10
Sharp
11
Pull the rear sides of the cover out then lift the cover up and pull back to fully remove.
12
Shock
13
You should release the potentially stored electrical charge in the capacitor to avoid injury.
14
You can do this by placing needle-nose pliers with an insulated handle across each set of terminals.
15
Sharp
16
Note the orientation of the power cord power wires, then disconnect the wires from the noise filter board.
17
Use the Phillips-head screwdriver to unthread the screw to release the grounding wire.
18
You can now lift the power cord strain relief out of the slot in the rear frame to fully remove the old cord.
19
To install the new power cord, feed the wires through the slot in the rear frame and seat the strain relief in the frame.
20
Slide the washer onto the grounding wire mounting screw, then thread the screw to secure the grounding wire to the frame.
21
Connect the power cord power wires to the appropriate terminals on the noise filter board.
22
Reinstall the microwave oven cover by first aligning the top edge then the sides.
23
Thread and tighten the seven screws to secure.
24
Plug the new power cord in and the microwave oven should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the power cord on a Frigidaire microwave oven (Model FPMO227NUFA). The most common reason for replacing this part is if the microwave is not working at all.
All of the information for this video is applicable to the following brands:
Frigidaire
All of the information for this video is applicable to the following brands:
Frigidaire
Step-By-Step Instructions
1
Frigidaire Microwave Oven - FPMO227NUFA
2
Frigidaire Microwave Oven Power Cord Replacement
3
Tools needed: T-15 tamper-proof Torx bit, Phillips-head screwdriver, needle-nose pliers
4
Shock
5
Because of the high voltage and high current used by microwave ovens, be aware that repairing this appliance poses a substantial risk for injury or death if precautions are not taken.
6
You should always unplug the microwave before you attempt any disassembly.
7
Since high voltage capacitors used in microwaves may retain a charge even after the microwave has been unplugged, we recommend that only experienced professionals access and replace internal components.
8
Unthread the six rear screws securing the cover using the t-15 tamper-proof torx bit.
9
Unthread the screw on the right side of the cover as well.
10
Sharp
11
Pull the rear sides of the cover out then lift the cover up and pull back to fully remove.
12
Shock
13
You should release the potentially stored electrical charge in the capacitor to avoid injury.
14
You can do this by placing needle-nose pliers with an insulated handle across each set of terminals.
15
Sharp
16
Note the orientation of the power cord power wires, then disconnect the wires from the noise filter board.
17
Use the Phillips-head screwdriver to unthread the screw to release the grounding wire.
18
You can now lift the power cord strain relief out of the slot in the rear frame to fully remove the old cord.
19
To install the new power cord, feed the wires through the slot in the rear frame and seat the strain relief in the frame.
20
Slide the washer onto the grounding wire mounting screw, then thread the screw to secure the grounding wire to the frame.
21
Connect the power cord power wires to the appropriate terminals on the noise filter board.
22
Reinstall the microwave oven cover by first aligning the top edge then the sides.
23
Thread and tighten the seven screws to secure.
24
Plug the new power cord in and the microwave oven should be ready for use.
Applicable Product Model
Parts Needed
Power Cord
$73.35
Total$0.00
Related Articles & Videos
04:41
Part Replacement
Frigidaire Microwave Oven Control Panel Assembly Replacement 5304519365
05:18
Part Replacement
Frigidaire Microwave Oven Door Release Push Button Replacement 5304519323
06:46
Part Replacement
Frigidaire Microwave Oven Door Interlock Switch Replacement 5304515182
05:26
Part Replacement
Frigidaire Microwave Oven Door Release Push Button Spring Replacement 5304519324
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com