DescriptionThis video provides step-by-step repair instructions for replacing the right door bottom pivot hinge on an LG Refrigerator. The most common reason for replacing the right door bottom pivot hinge is if it is bent or broken.
All of the information for this right door bottom pivot hinge replacement video is applicable to the following brands:
LG
Tools needed: Phillips Screwdriver/Drill Driver, ratchet wrench, step stool, 10mm Socket
Step-By-Step Instructions1
To replace the bottom left pivot hinge in this lg refrigerator…
2
You will need a step stool, a 10mm socket with rachet, and a philips screwdriver or drill driver with a number 2 phillips bit.
3
Before attempting any repairs, you should unplug the power to the appliance.
4
Use tape to hold doors in place when removing top hinge brackets.
5
Unscrew both phillips head screws and remove the hinge cover.
6
Remove the three 10mm bolts.
7
Pull the bracket up from the studs, twisting it to the side.
8
Remove the tape from the door and open it. lift the door off of the bottom hinge.
9
Remove the two 10mm bolts and phillips head screw. open the freezer for better access.
10
Remove the new pivot hinge from the package.
11
Place the new pivot hinge and start the 10mm bolts and phillips screw. then tighten.
12
Place the door onto the bottom pivot hinge and shut the door. use tape to secure the door.
13
Twist the bracket in position, and set in place over the studs. then secure with the 10mm bolts.
14
Snap the hinge cover into place over the hinge bracket and secure with both screws.
15
Plug the power cord back in.
16
…. and the lg refrigerator should be ready for use.