DescriptionThis video provides step-by-step repair instructions for replacing the center drawer slide rail in an LG Refrigerator. The most common reason for replacing the center drawer slide rail is if it is broken.
All of the information for this center drawer slide rail replacement video is applicable to the following brands:
LG
Tools needed: Phillips Screwdriver/Drill Driver
Step-By-Step Instructions1
To replace the center drawer slide rail in this lg refrigerator…
2
You will need a philips screwdriver or drill driver with a number 2 phillips bit.
3
Lift the front of the shelf assemblies up and unhook them from their slots and pull them out.
4
Pull out the crisper drawers, push up underneath the glass shelf and pull the shelf out.
5
Set the shelf upside down and remove the two phillips screws on the bottom of a side rail and the two screws on the bottom of the center rail.
6
Now remove the two screws located on the side of the center rail and take out the center drawer slide.
7
Remove the new center drawer slide rail from the packaging.
8
Insert the new drawer slide rail into the track and slip the slide rail pegs into their sockets.
9
Thread and tighten the two screws on the bottom of the side rail the bottom of the center rail.
10
Screw in the two screws on the side of the center rail.
11
Insert the assembly back into the fridge cavity.
12
Insert the glass shelf horizontally and slide the crisper drawers back into place.
13
Hook the shelf assemblies into their slots and gently set them.
14
…. and the lg refrigerator should be ready for use.