Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairSamsung Refrigerator LED Light Assembly Replacement DA41-00676K
Samsung Refrigerator LED Light Assembly Replacement DA41-00676K
Skill Level
Total Parts Cost
$136.40Estimated Savings
$112.5002:32
- Description
This video provides step-by-step repair instructions for replacing the LED light assembly on a Samsung Refrigerator (Model RF27T5501SRAA51). The most common reason for replacing this part is if the lights will not work at all.
All of the information for this video is applicable to the following brands:
Samsung
All of the information for this video is applicable to the following brands:
Samsung
Step By Step Instructions
1
To replace the led light assembly in this samsung refrigerator…
2
… you will need a phillips-head screwdriver and a small flat-head screwdriver.
3
Before you begin the procedure, unplug the appliance’s power cord.
4
Open both refrigerator doors…
5
… and use the small flat-head screwdriver to depress the retaining tabs to release the led light cover.
6
Using the phillips-head screwdriver, unthread the two screws mounting the led light holder to the top of the inner liner.
7
Depress the tabs to release the holder… then disconnect the wire connecter.
8
Push the old led light assembly bar away from the smaller retainers then lift up to remove.
9
To install the new led light assembly…
10
… keep the wires to the right as you secure the bar under the retainers.
11
Connect the wire connecter… then align the holder on the inner liner and snap it into place.
12
Thread the screws to fully secure.
13
Realign the side of the cover where the three retaining tabs are more closely positioned with the rear edge of the opening then snap the cover into position.
14
Plug the power cord back in…
15
… and the refrigerator should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the LED light assembly on a Samsung Refrigerator (Model RF27T5501SRAA51). The most common reason for replacing this part is if the lights will not work at all.
All of the information for this video is applicable to the following brands:
Samsung
All of the information for this video is applicable to the following brands:
Samsung
Step-By-Step Instructions
1
To replace the led light assembly in this samsung refrigerator…
2
… you will need a phillips-head screwdriver and a small flat-head screwdriver.
3
Before you begin the procedure, unplug the appliance’s power cord.
4
Open both refrigerator doors…
5
… and use the small flat-head screwdriver to depress the retaining tabs to release the led light cover.
6
Using the phillips-head screwdriver, unthread the two screws mounting the led light holder to the top of the inner liner.
7
Depress the tabs to release the holder… then disconnect the wire connecter.
8
Push the old led light assembly bar away from the smaller retainers then lift up to remove.
9
To install the new led light assembly…
10
… keep the wires to the right as you secure the bar under the retainers.
11
Connect the wire connecter… then align the holder on the inner liner and snap it into place.
12
Thread the screws to fully secure.
13
Realign the side of the cover where the three retaining tabs are more closely positioned with the rear edge of the opening then snap the cover into position.
14
Plug the power cord back in…
15
… and the refrigerator should be ready for use.
Applicable Product Model
Parts Needed
LED Light
$136.40
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com