Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairLG Refrigerator Ice Maker Replacement AEQ72909603 
LG Refrigerator Ice Maker Replacement AEQ72909603
Skill Level
Total Parts Cost
$227.76Estimated Savings
$112.5004:57
- Description
This video provides step-by-step repair instructions for replacing the ice maker on an LG Refrigerator (Model LFCS22520S). The most common reason for replacing this part is if the refrigerator is not making or dispensing ice.
All of the information for this video is applicable to the following brands:
LG
All of the information for this video is applicable to the following brands:
LG
Step By Step Instructions
1
As with any repair, you should unplug the power cord before beginning.
2
To replace the icemaker assembly in your freezer, first pull out the lower drawer.
3
Next, remove the screws securing the lower drawer assembly to the rails.
4
Remove the drawer bin by lifting it up from the rear.
5
Lift off the drawer assembly from the rails and set it aside.
6
Push the lower slide rails in and pull out the upper drawer.
7
Depress the tabs on the upper drawer supports and lift the upper drawer off.
8
Remove the mounting screws securing the icemaker assembly to the cabinet.
9
Use a small flathead screwdriver to depress the tabs to detach the assembly then pull the assembly forward.
10
Depress the tab to disconnect the wire harness to fully release the old icemaker.
11
You’re now ready to install the new icemaker assembly.
12
Connect the wire harness to the receptacle in the liner.
13
Slide the new assembly into position and snap it into place.
14
Reinstall the mounting screws.
15
Pull the upper slide rails out align the upper drawer on the supports and snap it into position.
16
Reinstall the lower drawer assembly by first pulling out the slide rails.
17
Now align the rear tabs on the drawer assembly with the rear slots on the rails then insert the front tabs into the front slots.
18
Replace the drawer bin by aligning the lip of the bin with the tabs and lower the bin into place.
19
Replace the screws to secure the drawer assembly to the rails.
20
You’re now ready to plug the power cord back in switch on the new icemaker and confirm that it works properly.
Description
This video provides step-by-step repair instructions for replacing the ice maker on an LG Refrigerator (Model LFCS22520S). The most common reason for replacing this part is if the refrigerator is not making or dispensing ice.
All of the information for this video is applicable to the following brands:
LG
All of the information for this video is applicable to the following brands:
LG
Step-By-Step Instructions
1
As with any repair, you should unplug the power cord before beginning.
2
To replace the icemaker assembly in your freezer, first pull out the lower drawer.
3
Next, remove the screws securing the lower drawer assembly to the rails.
4
Remove the drawer bin by lifting it up from the rear.
5
Lift off the drawer assembly from the rails and set it aside.
6
Push the lower slide rails in and pull out the upper drawer.
7
Depress the tabs on the upper drawer supports and lift the upper drawer off.
8
Remove the mounting screws securing the icemaker assembly to the cabinet.
9
Use a small flathead screwdriver to depress the tabs to detach the assembly then pull the assembly forward.
10
Depress the tab to disconnect the wire harness to fully release the old icemaker.
11
You’re now ready to install the new icemaker assembly.
12
Connect the wire harness to the receptacle in the liner.
13
Slide the new assembly into position and snap it into place.
14
Reinstall the mounting screws.
15
Pull the upper slide rails out align the upper drawer on the supports and snap it into position.
16
Reinstall the lower drawer assembly by first pulling out the slide rails.
17
Now align the rear tabs on the drawer assembly with the rear slots on the rails then insert the front tabs into the front slots.
18
Replace the drawer bin by aligning the lip of the bin with the tabs and lower the bin into place.
19
Replace the screws to secure the drawer assembly to the rails.
20
You’re now ready to plug the power cord back in switch on the new icemaker and confirm that it works properly.
Applicable Product Model
Parts Needed
Ice Maker Assembly
$227.76
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com