Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairCarrier/Gree ETAC Heat Pump Power Cord Replacement E2CORD-230V20A
Carrier/Gree ETAC Heat Pump Power Cord Replacement E2CORD-230V20A
Skill Level
Total Parts Cost
$180.04Estimated Savings
$112.5003:08
- Description
This video provides step-by-step instructions for replacing the power cord on a Carrier/Gree ETAC Heat Pump Unit. The most common reason for replacing this part is if the unit will not power on.
All of the information in this video is applicable to the following brands: Carrier, Gree
All of the information in this video is applicable to the following brands: Carrier, Gree
Step By Step Instructions
1
To replace the power cord on this carrier/gree etac heat pump unit…
2
… you will need a #2 phillips-head screwdriver.
3
Before you begin the procedure, be sure to turn the unit off…
4
…then detach the power cord access panel and unplug the old cord.
5
Remove the unit’s front panel by pulling the bottom of the panel out to release it from the tabs…then lift up.
6
Use the #2 phillips-head screwdriver to unthread the lower right screw securing the junction box cover.
7
Now unthread the three screws securing the junction box itself.
8
Pull back the cover to fully detach the junction box from the power cord.
9
Next, unthread the screw to release the cord from the retainer.
10
You can now disconnect the wire connecter to fully remove the old cord.
11
To install the new power cord…
12
… connect the wire connecter…
13
… then place the cord behind the retainer and rethread the screw to secure the retainer to the frame.
14
Reposition the junction box and rethread the screws.
15
Rethread the lower right screw to fully secure the cover.
16
Reinstall the front panel by aligning the tabs over the top rail then push the bottom of the panel in until it snaps into place.
17
Feed the new power cord into the base and plug it in.
18
The etac heat pump system should now be ready for use.
Description
This video provides step-by-step instructions for replacing the power cord on a Carrier/Gree ETAC Heat Pump Unit. The most common reason for replacing this part is if the unit will not power on.
All of the information in this video is applicable to the following brands: Carrier, Gree
All of the information in this video is applicable to the following brands: Carrier, Gree
Step-By-Step Instructions
1
To replace the power cord on this carrier/gree etac heat pump unit…
2
… you will need a #2 phillips-head screwdriver.
3
Before you begin the procedure, be sure to turn the unit off…
4
…then detach the power cord access panel and unplug the old cord.
5
Remove the unit’s front panel by pulling the bottom of the panel out to release it from the tabs…then lift up.
6
Use the #2 phillips-head screwdriver to unthread the lower right screw securing the junction box cover.
7
Now unthread the three screws securing the junction box itself.
8
Pull back the cover to fully detach the junction box from the power cord.
9
Next, unthread the screw to release the cord from the retainer.
10
You can now disconnect the wire connecter to fully remove the old cord.
11
To install the new power cord…
12
… connect the wire connecter…
13
… then place the cord behind the retainer and rethread the screw to secure the retainer to the frame.
14
Reposition the junction box and rethread the screws.
15
Rethread the lower right screw to fully secure the cover.
16
Reinstall the front panel by aligning the tabs over the top rail then push the bottom of the panel in until it snaps into place.
17
Feed the new power cord into the base and plug it in.
18
The etac heat pump system should now be ready for use.
Applicable Product Model
Parts Needed
Power Cord
$180.04
Total$0.00
Related Articles & Videos
08:46
Part Replacement
Carrier/Gree ETAC Heat Pump Ambient Temperature Sensor Replacement 3900012123
10:01
Part Replacement
Carrier/Gree ETAC Heat Pump Outdoor Coil Temperature Sensor Replacement 390000372
08:31
Part Replacement
Carrier/Gree ETAC Heat Pump Indoor Coil Temperature Sensor Replacement 390000596
12:27
Part Replacement
Carrier/Gree ETAC Heat Pump Indoor Fan Motor Replacement 1501180211
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com