Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairLG Dryer Moisture Sensor Mounting Bracket Replacement #4930EL2004D
LG Dryer Moisture Sensor Mounting Bracket Replacement #4930EL2004D
Skill Level
Total Parts Cost
$16.04Estimated Savings
$112.5003:08
- Description
This video provides step-by-step repair instructions for replacing the moisture sensor mounting bracket in an LG Dryer (Model DLEX4000B). The most common reason for replacing this part is if it is damaged or missing.
All of the information for this video is applicable to the following brands:
LG
All of the information for this video is applicable to the following brands:
LG
Step By Step Instructions
1
To replace the moisture sensor mounting bracket in your lg dryer…
2
You will need a phillips driver or drill driver with a phillips bit and needlenose pliers.
3
Unthread the three screws securing the filter cover and pull out the cover.
4
Unthread the screw holding the bracket.
5
Now unplug the bracket and remove it.
6
Use needlenose pliers to depress the tabs on the sensors and remove them.
7
To install the new mounting bracket…
8
Insert the ends of the sensors into the bracket and snap them into place.
9
Plug in the bracket and seat the pin into the dryer.
10
Rethread the screw to secure it.
11
Next, align and slide the filter assembly into place within the dryer.
12
Rethread the three screws to secure.
13
…and your dryer should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the moisture sensor mounting bracket in an LG Dryer (Model DLEX4000B). The most common reason for replacing this part is if it is damaged or missing.
All of the information for this video is applicable to the following brands:
LG
All of the information for this video is applicable to the following brands:
LG
Step-By-Step Instructions
1
To replace the moisture sensor mounting bracket in your lg dryer…
2
You will need a phillips driver or drill driver with a phillips bit and needlenose pliers.
3
Unthread the three screws securing the filter cover and pull out the cover.
4
Unthread the screw holding the bracket.
5
Now unplug the bracket and remove it.
6
Use needlenose pliers to depress the tabs on the sensors and remove them.
7
To install the new mounting bracket…
8
Insert the ends of the sensors into the bracket and snap them into place.
9
Plug in the bracket and seat the pin into the dryer.
10
Rethread the screw to secure it.
11
Next, align and slide the filter assembly into place within the dryer.
12
Rethread the three screws to secure.
13
…and your dryer should be ready for use.
Applicable Product Model
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com