Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairLG Electric Dryer PCB Assembly Replacement EBR85871801 
LG Electric Dryer PCB Assembly Replacement EBR85871801
Skill Level
Total Parts Cost
$97.94Estimated Savings
$112.5004:46
- Description
This video provides step-by-step repair instructions for replacing the PCB assembly on an LG electric dryer (model DLEX4000B). The most common reason for replacing this part is if the dryer will not run at all.
This coil replacement video is applicable to the following brands:
LG
Don't forget to like and comment on this video and subscribe to our channel!
This coil replacement video is applicable to the following brands:
LG
Don't forget to like and comment on this video and subscribe to our channel!
Step By Step Instructions
1
To replace the pcb assembly module in your lg dryer…
2
You will need a phillips screwdriver or drill driver with a phillips bit.
3
Before you attempt this, be sure to turn off the power to the appliance…
4
Pull the dryer away from the wall.
5
Unthread the five screws to remove the bracket.
6
Slide the lid and lift it off to remove from the dryer.
7
Unthread the two screws holding the control panel.
8
Pry the three tabs then pull back and lift up to free the control panel.
9
Unplug the wire harness from the display board.
10
Next, unthread the four screws on the pcb assembly.
11
Now lift and tilt the assembly to unhook it from the control panel then unplug the harness from the module and remove the module.
12
To install the new pcb assembly module…
13
Insert and snap the module in its place.
14
Then plug the harness into the module.
15
Set and snap in the display assembly…
16
…then rethread the four screws to secure.
17
Plug the harness back into the display assembly.
18
Insert the control panel into its grooves and push forward to snap in place…
19
…then rethread the two screws that hold it in place.
20
Place the lid on the dryer and pull forward to secure.
21
Rethread the five screws to reinstall the bracket.
22
Align and press on the control knob.
23
Push the dryer back into place.
24
Turn the power supply back on…
25
…and your dryer should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the PCB assembly on an LG electric dryer (model DLEX4000B). The most common reason for replacing this part is if the dryer will not run at all.
This coil replacement video is applicable to the following brands:
LG
Don't forget to like and comment on this video and subscribe to our channel!
This coil replacement video is applicable to the following brands:
LG
Don't forget to like and comment on this video and subscribe to our channel!
Step-By-Step Instructions
1
To replace the pcb assembly module in your lg dryer…
2
You will need a phillips screwdriver or drill driver with a phillips bit.
3
Before you attempt this, be sure to turn off the power to the appliance…
4
Pull the dryer away from the wall.
5
Unthread the five screws to remove the bracket.
6
Slide the lid and lift it off to remove from the dryer.
7
Unthread the two screws holding the control panel.
8
Pry the three tabs then pull back and lift up to free the control panel.
9
Unplug the wire harness from the display board.
10
Next, unthread the four screws on the pcb assembly.
11
Now lift and tilt the assembly to unhook it from the control panel then unplug the harness from the module and remove the module.
12
To install the new pcb assembly module…
13
Insert and snap the module in its place.
14
Then plug the harness into the module.
15
Set and snap in the display assembly…
16
…then rethread the four screws to secure.
17
Plug the harness back into the display assembly.
18
Insert the control panel into its grooves and push forward to snap in place…
19
…then rethread the two screws that hold it in place.
20
Place the lid on the dryer and pull forward to secure.
21
Rethread the five screws to reinstall the bracket.
22
Align and press on the control knob.
23
Push the dryer back into place.
24
Turn the power supply back on…
25
…and your dryer should be ready for use.
Applicable Product Model
Parts Needed
Power Supply Board
$97.94
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com