DescriptionThis video provides step-by-step repair instructions for replacing the LED light on an LG electric dryer (model DLEX4000B). The most common reason for replacing this part is if it is burned out.
This coil replacement video is applicable to the following brands:
LG
Don't forget to like and comment on this video and subscribe to our channel!
Step-By-Step Instructions1
To replace the led light in your lg dryer…
2
You will need a phillips screwdriver or drill driver with a phillips bit and needlenose pliers.
3
Before you attempt this, be sure to turn off the power to the appliance…
4
Pull the dryer away from the wall.
5
Unthread the five screws to remove the bracket.
6
Slide the lid and lift it off to remove from the dryer.
7
Unthread the two screws holding the control panel.
8
Pry the three tabs then pull back and lift up to free the control panel.
9
Unplug the wire harness from the display pcb assembly.
11
Use the pliers to compress the side tabs on the light and push down to free it.
12
To install the new led light…
13
Align the tabs of the light and snap it in place.
15
Plug the wire harness back into the pcb assembly.
16
Insert the control panel into its grooves and push forward to snap in place…
17
…then rethread the two screws that hold it in place.
18
Place the lid on the dryer and pull forward to secure.
19
Rethread the five screws to reinstall the bracket.
20
Push the dryer back into place.
21
Turn the power supply back on…
22
…and your dryer should be ready for use.