Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairLG Washer Hot Water Inlet Valve Replacement 5220FR2006Z
This video provides step-by-step repair instructions for replacing the hot water inlet valve in an LG washer (Model WM4000HBA). The most common reason for replacing this part is if it's missing or broken.
This replacement video is applicable to the following brands:
LG
Don't forget to like and comment on this video and subscribe to our channel!
LG Washer Hot Water Inlet Valve Replacement 5220FR2006Z
Skill Level
Total Parts Cost
$65.73Estimated Savings
$112.5004:25
- Description
This video provides step-by-step repair instructions for replacing the hot water inlet valve in an LG washer (Model WM4000HBA). The most common reason for replacing this part is if it's missing or broken.
This replacement video is applicable to the following brands:
LG
Don't forget to like and comment on this video and subscribe to our channel!
Step By Step Instructions
1
To replace the hot water inlet valve in your lg washer, you will need channellock pliers, a flathead screwdriver, pliers, and a drill driver with a phillips bit.
2
Before you begin the procedure, unplug the washer.
3
Turn off the water supply.
4
Pull the washer away from the wall.
5
Unthread the water supply lines. be prepared for water to spill.
6
Unthread the two screws on the top panel.
7
Slide and lift the top panel off.
8
Remove the twist tie.
9
Slide the tension clamp back on the hose.
10
Use the flathead to detach the hose from the inlet valve.
11
Note the orientation of the plug and unplug the hot water inlet valve.
12
Unthread the screw on the inlet valve bracket.
13
Slide the bracket to remove it.
14
Wiggle the valve free from the bracket.
15
To install the new hot water inlet valve…
16
Press the new valve in the bracket, then insert the bracket in the panel and slide to lock in place.
17
Rethread the screw to secure the bracket.
18
Plug in the inlet valve.
19
Attach the hose to the inlet valve.
20
Slide the tension clamp into place.
21
Fasten the hoses together with the twist tie.
22
Set and slide the top panel onto the washer.
23
Rethread the two screws onto the panel.
24
Rethread the water supply lines over the hot and cold inlets.
25
Push the washer back into place.
26
Turn on the water supply, as well as the power, and your washer should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the hot water inlet valve in an LG washer (Model WM4000HBA). The most common reason for replacing this part is if it's missing or broken.
This replacement video is applicable to the following brands:
LG
Don't forget to like and comment on this video and subscribe to our channel!
This video provides step-by-step repair instructions for replacing the hot water inlet valve in an LG washer (Model WM4000HBA). The most common reason for replacing this part is if it's missing or broken.
This replacement video is applicable to the following brands:
LG
Don't forget to like and comment on this video and subscribe to our channel!
Step-By-Step Instructions
1
To replace the hot water inlet valve in your lg washer, you will need channellock pliers, a flathead screwdriver, pliers, and a drill driver with a phillips bit.
2
Before you begin the procedure, unplug the washer.
3
Turn off the water supply.
4
Pull the washer away from the wall.
5
Unthread the water supply lines. be prepared for water to spill.
6
Unthread the two screws on the top panel.
7
Slide and lift the top panel off.
8
Remove the twist tie.
9
Slide the tension clamp back on the hose.
10
Use the flathead to detach the hose from the inlet valve.
11
Note the orientation of the plug and unplug the hot water inlet valve.
12
Unthread the screw on the inlet valve bracket.
13
Slide the bracket to remove it.
14
Wiggle the valve free from the bracket.
15
To install the new hot water inlet valve…
16
Press the new valve in the bracket, then insert the bracket in the panel and slide to lock in place.
17
Rethread the screw to secure the bracket.
18
Plug in the inlet valve.
19
Attach the hose to the inlet valve.
20
Slide the tension clamp into place.
21
Fasten the hoses together with the twist tie.
22
Set and slide the top panel onto the washer.
23
Rethread the two screws onto the panel.
24
Rethread the water supply lines over the hot and cold inlets.
25
Push the washer back into place.
26
Turn on the water supply, as well as the power, and your washer should be ready for use.
Applicable Product Model
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com