Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairLG Washer Tension Clamp Replacement 4861FR3068A
This video provides step-by-step repair instructions for replacing the tension clamp in an LG washer (Model WM4000HBA). The most common reason for replacing this part is if it's missing or broken.
This replacement video is applicable to the following brands:
LG
Don't forget to like and comment on this video and subscribe to our channel!
LG Washer Tension Clamp Replacement 4861FR3068A
Skill Level
Total Parts Cost
$13.82Estimated Savings
$112.5002:47
- Description
This video provides step-by-step repair instructions for replacing the tension clamp in an LG washer (Model WM4000HBA). The most common reason for replacing this part is if it's missing or broken.
This replacement video is applicable to the following brands:
LG
Don't forget to like and comment on this video and subscribe to our channel!
Step By Step Instructions
1
To replace the tension clamp in your lg washer, you will need pliers, a flathead screwdriver, and a drill driver with a phillips bit.
2
Before you begin the procedure, unplug the washer.
3
Turn off the water supply.
4
Pull the washer away from the wall.
5
Unthread the two screws on the top panel.
6
Slide and lift the top panel off.
7
Slide the tension clamp back on the hose.
8
Depending on the location of the repair, use the flathead to detatch the hose end from the detergent dispenser or inlet valve, then remove the tension clamp from the hose.
9
To install the new tension clamp, slide the tension clamp on the end of the hose.
10
Attach the end of the hose to the detergent dispenser or inlet valve.
11
Slide the tension clamp into place.
12
Set and slide the top panel onto the washer.
13
Rethread the two screws onto the panel.
14
Push the washer back into place.
15
Turn on the water supply, as well as the power, and your washer should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the tension clamp in an LG washer (Model WM4000HBA). The most common reason for replacing this part is if it's missing or broken.
This replacement video is applicable to the following brands:
LG
Don't forget to like and comment on this video and subscribe to our channel!
This video provides step-by-step repair instructions for replacing the tension clamp in an LG washer (Model WM4000HBA). The most common reason for replacing this part is if it's missing or broken.
This replacement video is applicable to the following brands:
LG
Don't forget to like and comment on this video and subscribe to our channel!
Step-By-Step Instructions
1
To replace the tension clamp in your lg washer, you will need pliers, a flathead screwdriver, and a drill driver with a phillips bit.
2
Before you begin the procedure, unplug the washer.
3
Turn off the water supply.
4
Pull the washer away from the wall.
5
Unthread the two screws on the top panel.
6
Slide and lift the top panel off.
7
Slide the tension clamp back on the hose.
8
Depending on the location of the repair, use the flathead to detatch the hose end from the detergent dispenser or inlet valve, then remove the tension clamp from the hose.
9
To install the new tension clamp, slide the tension clamp on the end of the hose.
10
Attach the end of the hose to the detergent dispenser or inlet valve.
11
Slide the tension clamp into place.
12
Set and slide the top panel onto the washer.
13
Rethread the two screws onto the panel.
14
Push the washer back into place.
15
Turn on the water supply, as well as the power, and your washer should be ready for use.
Applicable Product Model
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com