Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairLG Washer Nozzle Replacement 4974ER3008A
This video provides step-by-step repair instructions for replacing the nozzle in an LG washer (Model WM4000HBA). The most common reason for replacing this part is if it's missing or broken.
This replacement video is applicable to the following brands:
LG
Don't forget to like and comment on this video and subscribe to our channel!
LG Washer Nozzle Replacement 4974ER3008A
Skill Level
Total Parts Cost
$11.98Estimated Savings
$112.5002:22
- Description
This video provides step-by-step repair instructions for replacing the nozzle in an LG washer (Model WM4000HBA). The most common reason for replacing this part is if it's missing or broken.
This replacement video is applicable to the following brands:
LG
Don't forget to like and comment on this video and subscribe to our channel!
Step By Step Instructions
1
To replace the nozzle in your lg washer, you will need a drill driver with a phillips bit or a phillips screwdriver.
2
Before you begin the procedure, unplug the washer.
3
Pull the washer away from the wall.
4
Unthread the two screws on the top panel.
5
Slide and lift the top panel off.
6
Loosen the clamp on the bellow and remove the bellow from the tub,then remove the nozzle
7
To install the new nozzle, set the nozzle into the tub, then position the end of the bellow on the tub, and tighten the clamp.
8
Set and slide the top panel onto the washer.
9
Rethread the two screws onto the panel.
10
Push the washer back into place.
11
Turn on the power, and your washer should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the nozzle in an LG washer (Model WM4000HBA). The most common reason for replacing this part is if it's missing or broken.
This replacement video is applicable to the following brands:
LG
Don't forget to like and comment on this video and subscribe to our channel!
This video provides step-by-step repair instructions for replacing the nozzle in an LG washer (Model WM4000HBA). The most common reason for replacing this part is if it's missing or broken.
This replacement video is applicable to the following brands:
LG
Don't forget to like and comment on this video and subscribe to our channel!
Step-By-Step Instructions
1
To replace the nozzle in your lg washer, you will need a drill driver with a phillips bit or a phillips screwdriver.
2
Before you begin the procedure, unplug the washer.
3
Pull the washer away from the wall.
4
Unthread the two screws on the top panel.
5
Slide and lift the top panel off.
6
Loosen the clamp on the bellow and remove the bellow from the tub,then remove the nozzle
7
To install the new nozzle, set the nozzle into the tub, then position the end of the bellow on the tub, and tighten the clamp.
8
Set and slide the top panel onto the washer.
9
Rethread the two screws onto the panel.
10
Push the washer back into place.
11
Turn on the power, and your washer should be ready for use.
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com