Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairKitchenAid Refrigerator Crisper Drawer Slide Rail Replacement W11233912 
KitchenAid Refrigerator Crisper Drawer Slide Rail Replacement W11233912
Skill Level
Total Parts Cost
$203.85Estimated Savings
$112.5001:49
- Description
This video provides step-by-step repair instructions for replacing the crisper drawer slide rail on a KitchenAid Refrigerator (Model KRFF507HPS02). The most common reason for replacing this part is if the drawer will not open or close properly.
All of the information for this video is applicable to the following brands: KitchenAid
All of the information for this video is applicable to the following brands: KitchenAid
Step By Step Instructions
1
To replace a crisper drawer slide rail in this kitchenaid refrigerator, you will need a small flat-head screwdriver.
2
Pull the appropriate crisper drawer forward then hold the side support brackets as you push the drawer back to fully detach.
3
Depress the retaining tab and slide the entire slide rail assembly out.
4
You can now use the small flat-head screwdriver to help pull the bracket retaining tab away from the slide rail then push the bracket back to detach it from the old rail.
5
To install the new crisper drawer slide rail, align the holes in the bracket with the hooks on the rail then pull the bracket forward to lock it into place.
6
Align the slide rail assembly on the track and push straight back until it snaps into position.
7
To reinstall the drawer, confirm both slide rails are pulled out then insert the support bracket tabs into the slots in the side channels of the drawer and push the drawer in.
Description
This video provides step-by-step repair instructions for replacing the crisper drawer slide rail on a KitchenAid Refrigerator (Model KRFF507HPS02). The most common reason for replacing this part is if the drawer will not open or close properly.
All of the information for this video is applicable to the following brands: KitchenAid
All of the information for this video is applicable to the following brands: KitchenAid
Step-By-Step Instructions
1
To replace a crisper drawer slide rail in this kitchenaid refrigerator, you will need a small flat-head screwdriver.
2
Pull the appropriate crisper drawer forward then hold the side support brackets as you push the drawer back to fully detach.
3
Depress the retaining tab and slide the entire slide rail assembly out.
4
You can now use the small flat-head screwdriver to help pull the bracket retaining tab away from the slide rail then push the bracket back to detach it from the old rail.
5
To install the new crisper drawer slide rail, align the holes in the bracket with the hooks on the rail then pull the bracket forward to lock it into place.
6
Align the slide rail assembly on the track and push straight back until it snaps into position.
7
To reinstall the drawer, confirm both slide rails are pulled out then insert the support bracket tabs into the slots in the side channels of the drawer and push the drawer in.
Applicable Product Model
Parts Needed
Drawer Slide Rail
$203.85
Total$0.00
Related Articles & Videos
02:47
Part Replacement
KitchenAid Refrigerator Lower Freezer Drawer Replacement W10594047
10:40
Part Replacement
KitchenAid Refrigerator Evaporator Fan Motor Replacement W11224591
04:12
Part Replacement
KitchenAid Refrigerator Upper Access Panel LED Light Assembly Replacement W11484839
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com