Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairKitchenAid Refrigerator Upper Access Panel LED Light Assembly Replacement W11484839 
This video provides step-by-step repair instructions for replacing the upper access panel LED light assembly on a KitchenAid Refrigerator (Model KRFF507HPS02). The most common reason for replacing this part is if the light is burned out.
All of the information for this video is applicable to the following brands: KitchenAid
KitchenAid Refrigerator Upper Access Panel LED Light Assembly Replacement W11484839
Skill Level
Total Parts Cost
$80.43Estimated Savings
$112.5004:12
- Description
This video provides step-by-step repair instructions for replacing the upper access panel LED light assembly on a KitchenAid Refrigerator (Model KRFF507HPS02). The most common reason for replacing this part is if the light is burned out.
All of the information for this video is applicable to the following brands: KitchenAid
Step By Step Instructions
1
To replace the upper access panel led light assembly in this kitchenaid refrigerator, you will need a quarter-inch nut driver and a small flat-head screwdriver.
2
Before you begin the procedure, unplug the appliance’s power cord.
3
Open the water filter cover and remove the water filter.
4
Use the quarter-inch nut driver to unthread the two screws securing the upper cover panel.
5
Detach the panel and disconnect the led light wire harness to fully remove the panel.
6
Peel back the tape securing the led light wires.
7
Use the small flat-head screwdriver to depress the retaining tabs to release all three led lights from the panel.
8
You’re now ready to install the new led light assembly.
9
With the wire connecter facing the front of the panel, align and snap the three led lights into place.
10
Secure the wires with the tape.
11
Reinstall the upper cover panel by first reconnecting the led light wire harness.
12
Align the three rear upper cover panel tabs with the housing brackets and snap the panel into position.
13
Rethread the two screws to secure.
14
Reinsert the water filter into the housing and close the cover.
15
Plug the power cord back in, and the refrigerator should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the upper access panel LED light assembly on a KitchenAid Refrigerator (Model KRFF507HPS02). The most common reason for replacing this part is if the light is burned out.
All of the information for this video is applicable to the following brands: KitchenAid
This video provides step-by-step repair instructions for replacing the upper access panel LED light assembly on a KitchenAid Refrigerator (Model KRFF507HPS02). The most common reason for replacing this part is if the light is burned out.
All of the information for this video is applicable to the following brands: KitchenAid
Step-By-Step Instructions
1
To replace the upper access panel led light assembly in this kitchenaid refrigerator, you will need a quarter-inch nut driver and a small flat-head screwdriver.
2
Before you begin the procedure, unplug the appliance’s power cord.
3
Open the water filter cover and remove the water filter.
4
Use the quarter-inch nut driver to unthread the two screws securing the upper cover panel.
5
Detach the panel and disconnect the led light wire harness to fully remove the panel.
6
Peel back the tape securing the led light wires.
7
Use the small flat-head screwdriver to depress the retaining tabs to release all three led lights from the panel.
8
You’re now ready to install the new led light assembly.
9
With the wire connecter facing the front of the panel, align and snap the three led lights into place.
10
Secure the wires with the tape.
11
Reinstall the upper cover panel by first reconnecting the led light wire harness.
12
Align the three rear upper cover panel tabs with the housing brackets and snap the panel into position.
13
Rethread the two screws to secure.
14
Reinsert the water filter into the housing and close the cover.
15
Plug the power cord back in, and the refrigerator should be ready for use.
Applicable Product Model
Parts Needed
LED Light
$80.43
Total$0.00
Related Articles & Videos
02:47
Part Replacement
KitchenAid Refrigerator Lower Freezer Drawer Replacement W10594047
10:40
Part Replacement
KitchenAid Refrigerator Evaporator Fan Motor Replacement W11224591
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com