Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairKitchenAid Refrigerator Left Refrigerator Door Closer Replacement W10904595 
KitchenAid Refrigerator Left Refrigerator Door Closer Replacement W10904595
Skill Level
Total Parts Cost
$10.85Estimated Savings
$112.5004:48
- Description
This video provides step-by-step repair instructions for replacing the left refrigerator door closer on a KitchenAid Refrigerator (Model KRFF507HPS02). The most common reason for replacing this part is if the door will not close on its own.
All of the information for this video is applicable to the following brands: KitchenAid
All of the information for this video is applicable to the following brands: KitchenAid
Step By Step Instructions
1
To replace the left refrigerator door closer on this kitchenaid refrigerator, you will need a phillips-head screwdriver, a quarter-inch nut driver, and a t-25 torx bit.
2
Before you begin the procedure, unplug the appliance’s power cord.
3
Use the phillips-head screwdriver to unthread the screw to detach the hinge cover.
4
Lift up the clasp and detach the dispenser water supply line.
5
Disconnect the wire connecter, and unthread the screw to release the grounding wire.
6
Now using the t-25 torx bit, unthread the two mounting screws securing the hinge.
7
Have an assistant help to hold the door in place, as you lift the hinge up and remove the bushing to detach it from the wires and water tube.
8
Detach the hinge itself from the wires and water tube.
9
Have the assistant help you to lift the door off the center hinge, and set the door on a towel or blanket.
10
Use the quarter-inch nut driver to unthread the two mounting screws to release the old door closer.
11
To install the new door closer, align it on the bottom of the door and thread the two screws to secure.
12
Reinstall the refrigerator door by positioning it on the closing cam.
13
Confirm the mullion heater flap is closed, then close the door and hold it in position.
14
Feed the water tube through the upper door hinge then push the wires through the slot in the hinge.
15
Reinsert the wires and tube in the bushing then insert the bushing into the upper hinge.
16
Position the hinge on the door and cabinet, and thread the two mounting screws to secure.
17
Reconnect the wire connecter.
18
Reattach the water supply line.
19
Secure the grounding wire with the screw.
20
Realign the hinge cover and thread the screw to secure.
21
Plug the power cord back in, and the refrigerator should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the left refrigerator door closer on a KitchenAid Refrigerator (Model KRFF507HPS02). The most common reason for replacing this part is if the door will not close on its own.
All of the information for this video is applicable to the following brands: KitchenAid
All of the information for this video is applicable to the following brands: KitchenAid
Step-By-Step Instructions
1
To replace the left refrigerator door closer on this kitchenaid refrigerator, you will need a phillips-head screwdriver, a quarter-inch nut driver, and a t-25 torx bit.
2
Before you begin the procedure, unplug the appliance’s power cord.
3
Use the phillips-head screwdriver to unthread the screw to detach the hinge cover.
4
Lift up the clasp and detach the dispenser water supply line.
5
Disconnect the wire connecter, and unthread the screw to release the grounding wire.
6
Now using the t-25 torx bit, unthread the two mounting screws securing the hinge.
7
Have an assistant help to hold the door in place, as you lift the hinge up and remove the bushing to detach it from the wires and water tube.
8
Detach the hinge itself from the wires and water tube.
9
Have the assistant help you to lift the door off the center hinge, and set the door on a towel or blanket.
10
Use the quarter-inch nut driver to unthread the two mounting screws to release the old door closer.
11
To install the new door closer, align it on the bottom of the door and thread the two screws to secure.
12
Reinstall the refrigerator door by positioning it on the closing cam.
13
Confirm the mullion heater flap is closed, then close the door and hold it in position.
14
Feed the water tube through the upper door hinge then push the wires through the slot in the hinge.
15
Reinsert the wires and tube in the bushing then insert the bushing into the upper hinge.
16
Position the hinge on the door and cabinet, and thread the two mounting screws to secure.
17
Reconnect the wire connecter.
18
Reattach the water supply line.
19
Secure the grounding wire with the screw.
20
Realign the hinge cover and thread the screw to secure.
21
Plug the power cord back in, and the refrigerator should be ready for use.
Applicable Product Model
Parts Needed
Closing Mechanism
$10.85
Total$0.00
Related Articles & Videos
02:47
Part Replacement
KitchenAid Refrigerator Lower Freezer Drawer Replacement W10594047
10:40
Part Replacement
KitchenAid Refrigerator Evaporator Fan Motor Replacement W11224591
04:12
Part Replacement
KitchenAid Refrigerator Upper Access Panel LED Light Assembly Replacement W11484839
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com