DescriptionThis video provides step-by-step repair instructions for replacing the door pivot block on a KitchenAid Refrigerator (Model KRFF507HPS02). The most common reason for replacing this part is if the doors are not closing properly.
All of the information for this video is applicable to the following brands: KitchenAid
Step-By-Step Instructions1
To replace the door pivot block on this kitchenaid refrigerator, you will need a phillips-head screwdriver.
2
Open both refrigerator doors, and use the phillips-head screwdriver to unthread the two mounting screws securing the old block to the liner.
3
To install the new door pivot block, position it on the liner and thread the two screws to secure.
4
Once installed, confirm the pivot block opens the door mullion heater when the left refrigerator door is closed.