Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairKitchenAid Refrigerator Door Mullion Heater Replacement W10806457 
KitchenAid Refrigerator Door Mullion Heater Replacement W10806457
Skill Level
Total Parts Cost
$120.89Estimated Savings
$112.5002:03
- Description
This video provides step-by-step repair instructions for replacing the door mullion heater on a KitchenAid Refrigerator (Model KRFF507HPS02). The most common reason for replacing this part is if it is damaged or no longer heating.
All of the information for this video is applicable to the following brands: KitchenAid
All of the information for this video is applicable to the following brands: KitchenAid
Step By Step Instructions
1
To replace the door mullion heater on this kitchenaid refrigerator, you will need a quarter-inch nut driver and a mallet.
2
Before you begin the procedure, unplug the appliance’s power cord.
3
Open the left refrigerator door, and use the quarter-inch nut driver to unthread the screw securing the mullion’s center hinge to the inner liner.
4
Use the mallet to tap the bottom of the mullion to help detach.
5
Now depress the tabs to disconnect the wire harness connecter to fully remove the old component.
6
To install the new door mullion heater, first confirm the wire harness connecter is secured under the retaining clip, then connect the wire connecter.
7
Align the upper and lower hinges on the liner mounting posts and the center hinge tabs inside the slot in the liner, then slide the mullion down.
8
Thread the screw to secure the center hinge.
9
Plug the power cord back in, and the refrigerator should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the door mullion heater on a KitchenAid Refrigerator (Model KRFF507HPS02). The most common reason for replacing this part is if it is damaged or no longer heating.
All of the information for this video is applicable to the following brands: KitchenAid
All of the information for this video is applicable to the following brands: KitchenAid
Step-By-Step Instructions
1
To replace the door mullion heater on this kitchenaid refrigerator, you will need a quarter-inch nut driver and a mallet.
2
Before you begin the procedure, unplug the appliance’s power cord.
3
Open the left refrigerator door, and use the quarter-inch nut driver to unthread the screw securing the mullion’s center hinge to the inner liner.
4
Use the mallet to tap the bottom of the mullion to help detach.
5
Now depress the tabs to disconnect the wire harness connecter to fully remove the old component.
6
To install the new door mullion heater, first confirm the wire harness connecter is secured under the retaining clip, then connect the wire connecter.
7
Align the upper and lower hinges on the liner mounting posts and the center hinge tabs inside the slot in the liner, then slide the mullion down.
8
Thread the screw to secure the center hinge.
9
Plug the power cord back in, and the refrigerator should be ready for use.
Applicable Product Model
Parts Needed
Mullion Heater
$120.89
Total$0.00
Related Articles & Videos
02:47
Part Replacement
KitchenAid Refrigerator Lower Freezer Drawer Replacement W10594047
10:40
Part Replacement
KitchenAid Refrigerator Evaporator Fan Motor Replacement W11224591
04:12
Part Replacement
KitchenAid Refrigerator Upper Access Panel LED Light Assembly Replacement W11484839
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com