Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairKitchenAid Refrigerator Ice Chute Replacement W10347055 
KitchenAid Refrigerator Ice Chute Replacement W10347055
Skill Level
Total Parts Cost
$47.37Estimated Savings
$112.5002:06
- Description
This video provides step-by-step repair instructions for replacing the ice chute on a KitchenAid Refrigerator (Model KRFF507HPS02). The most common reason for replacing this part is if it is damaged or missing.
All of the information for this video is applicable to the following brands: KitchenAid
All of the information for this video is applicable to the following brands: KitchenAid
Step By Step Instructions
1
To replace the ice chute in this kitchenaid refrigerator, you will need a phillips-head screwdriver.
2
Before you begin the procedure, unplug the appliance’s power cord.
3
Open the ice compartment door and pull the retaining lever forward then lift the ice bucket assembly up to remove.
4
Use the phillips-head screwdriver to unthread the four screws securing the ice chute.
5
With the screws unthreaded, you can lift the old ice chute out.
6
To install the new ice chute, position the chute over the auger motor drive shaft, then secure the chute with the screws.
7
Realign the ice bucket assembly in the compartment and snap it into position.
8
Plug the power cord back in, and the refrigerator should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the ice chute on a KitchenAid Refrigerator (Model KRFF507HPS02). The most common reason for replacing this part is if it is damaged or missing.
All of the information for this video is applicable to the following brands: KitchenAid
All of the information for this video is applicable to the following brands: KitchenAid
Step-By-Step Instructions
1
To replace the ice chute in this kitchenaid refrigerator, you will need a phillips-head screwdriver.
2
Before you begin the procedure, unplug the appliance’s power cord.
3
Open the ice compartment door and pull the retaining lever forward then lift the ice bucket assembly up to remove.
4
Use the phillips-head screwdriver to unthread the four screws securing the ice chute.
5
With the screws unthreaded, you can lift the old ice chute out.
6
To install the new ice chute, position the chute over the auger motor drive shaft, then secure the chute with the screws.
7
Realign the ice bucket assembly in the compartment and snap it into position.
8
Plug the power cord back in, and the refrigerator should be ready for use.
Applicable Product Model
Parts Needed
Plate
$47.37
Total$0.00
Related Articles & Videos
02:47
Part Replacement
KitchenAid Refrigerator Lower Freezer Drawer Replacement W10594047
10:40
Part Replacement
KitchenAid Refrigerator Evaporator Fan Motor Replacement W11224591
04:12
Part Replacement
KitchenAid Refrigerator Upper Access Panel LED Light Assembly Replacement W11484839
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com