Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairKitchenAid Refrigerator Auger Motor Shaft Seal Clip Replacement W10847834 
KitchenAid Refrigerator Auger Motor Shaft Seal Clip Replacement W10847834
Skill Level
Total Parts Cost
$8.49Estimated Savings
$112.5002:40
- Description
This video provides step-by-step repair instructions for replacing the auger motor shaft seal clip on a KitchenAid Refrigerator (Model KRFF507HPS02). The most common reason for replacing this part is if it is damaged or missing.
All of the information for this video is applicable to the following brands: KitchenAid
All of the information for this video is applicable to the following brands: KitchenAid
Step By Step Instructions
1
To replace the auger motor shaft seal clip in this kitchenaid refrigerator, you will need a phillips-head screwdriver and a heat gun.
2
Before you begin the procedure, unplug the appliance’s power cord.
3
Open the ice compartment door and pull the retaining lever forward then lift the ice bucket assembly up to remove.
4
Use the phillips-head screwdriver to unthread the four screws securing the ice chute.
5
With the screws unthreaded, you can lift the ice chute out.
6
Because the clip retaining tabs are so rigid, we recommend using the heat gun or a hair dryer to heat them up to make them more pliable.
7
You can now depress the tabs to release the old clip.
8
Before you install the new auger motor shaft seal clip, confirm the seal is properly positioned.
9
Now align the clip and snap it into place.
10
Reinstall the ice chute by positioning it over the auger motor drive shaft, then secure the chute with the screws.
11
Realign the ice bucket assembly in the compartment and snap it into position.
12
Plug the power cord back in, and the refrigerator should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the auger motor shaft seal clip on a KitchenAid Refrigerator (Model KRFF507HPS02). The most common reason for replacing this part is if it is damaged or missing.
All of the information for this video is applicable to the following brands: KitchenAid
All of the information for this video is applicable to the following brands: KitchenAid
Step-By-Step Instructions
1
To replace the auger motor shaft seal clip in this kitchenaid refrigerator, you will need a phillips-head screwdriver and a heat gun.
2
Before you begin the procedure, unplug the appliance’s power cord.
3
Open the ice compartment door and pull the retaining lever forward then lift the ice bucket assembly up to remove.
4
Use the phillips-head screwdriver to unthread the four screws securing the ice chute.
5
With the screws unthreaded, you can lift the ice chute out.
6
Because the clip retaining tabs are so rigid, we recommend using the heat gun or a hair dryer to heat them up to make them more pliable.
7
You can now depress the tabs to release the old clip.
8
Before you install the new auger motor shaft seal clip, confirm the seal is properly positioned.
9
Now align the clip and snap it into place.
10
Reinstall the ice chute by positioning it over the auger motor drive shaft, then secure the chute with the screws.
11
Realign the ice bucket assembly in the compartment and snap it into position.
12
Plug the power cord back in, and the refrigerator should be ready for use.
Applicable Product Model
Parts Needed
Clip
$8.49
Total$0.00
Related Articles & Videos
02:47
Part Replacement
KitchenAid Refrigerator Lower Freezer Drawer Replacement W10594047
10:40
Part Replacement
KitchenAid Refrigerator Evaporator Fan Motor Replacement W11224591
04:12
Part Replacement
KitchenAid Refrigerator Upper Access Panel LED Light Assembly Replacement W11484839
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com