Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairKitchenAid Refrigerator Upper Freezer Drawer Roller Replacement W11578839 
KitchenAid Refrigerator Upper Freezer Drawer Roller Replacement W11578839
Skill Level
Total Parts Cost
$9.23Estimated Savings
$112.5001:55
- Description
This video provides step-by-step repair instructions for replacing the upper freezer drawer roller on a KitchenAid Refrigerator (Model KRFF507HPS02). The most common reason for replacing this part is if the drawer will not slide properly.
All of the information for this video is applicable to the following brands: KitchenAid
All of the information for this video is applicable to the following brands: KitchenAid
Step By Step Instructions
1
To replace an upper freezer drawer roller in this kitchenaid refrigerator, you will need a small flat-head screwdriver and needle-nose pliers.
2
Open the freezer drawer, and use the small flat-head screwdriver to pry the left slide rail tab away from the liner enough to release the drawer stop.
3
Do the same to release the right drawer stop.
4
With the stops out, you can fully remove the drawer.
5
Use the needle-nose pliers to squeeze the appropriate axle retaining tabs to release the axle and the old roller.
6
To install the new roller, align it in the bracket then snap the axle into place to secure.
7
Confirm the roller spins freely, then reinstall the drawer by, aligning the rear rollers on the track and the front rollers on the lower drawer then push the drawer in.
8
Snap both drawer stops into place to secure.
Description
This video provides step-by-step repair instructions for replacing the upper freezer drawer roller on a KitchenAid Refrigerator (Model KRFF507HPS02). The most common reason for replacing this part is if the drawer will not slide properly.
All of the information for this video is applicable to the following brands: KitchenAid
All of the information for this video is applicable to the following brands: KitchenAid
Step-By-Step Instructions
1
To replace an upper freezer drawer roller in this kitchenaid refrigerator, you will need a small flat-head screwdriver and needle-nose pliers.
2
Open the freezer drawer, and use the small flat-head screwdriver to pry the left slide rail tab away from the liner enough to release the drawer stop.
3
Do the same to release the right drawer stop.
4
With the stops out, you can fully remove the drawer.
5
Use the needle-nose pliers to squeeze the appropriate axle retaining tabs to release the axle and the old roller.
6
To install the new roller, align it in the bracket then snap the axle into place to secure.
7
Confirm the roller spins freely, then reinstall the drawer by, aligning the rear rollers on the track and the front rollers on the lower drawer then push the drawer in.
8
Snap both drawer stops into place to secure.
Applicable Product Model
Parts Needed
Roller
$9.23
Total$0.00
Related Articles & Videos
02:47
Part Replacement
KitchenAid Refrigerator Lower Freezer Drawer Replacement W10594047
10:40
Part Replacement
KitchenAid Refrigerator Evaporator Fan Motor Replacement W11224591
04:12
Part Replacement
KitchenAid Refrigerator Upper Access Panel LED Light Assembly Replacement W11484839
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com