Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairKitchenAid Refrigerator Pantry Front Cover Replacement W11228264 
KitchenAid Refrigerator Pantry Front Cover Replacement W11228264
Total Parts Cost
$NaN06:11
- Description
This video provides step-by-step repair instructions for replacing the pantry front cover on a KitchenAid Refrigerator (Model KRFF507HPS02). The most common reason for replacing this part is if it is damaged or missing.
All of the information for this video is applicable to the following brands: KitchenAid
All of the information for this video is applicable to the following brands: KitchenAid
Step By Step Instructions
1
To replace the pantry front cover assembly in this kitchenaid refrigerator, you will need a ninety-degree pick.
2
Your first step is to remove all four glass shelves by lifting the front of each shelf up then detach the bracket tabs from the shelf support to remove.
3
Next, pull the platter shelf forward and lift the platter shelf glass up from underneath to remove.
4
Next, open both crisper drawers, reach in and push the crisper cover glass up and forward from underneath.
5
Close the drawers and remove the glass.
6
Now fully uninstall both crisper drawers by pulling them forward then hold the side support brackets as you push the drawers back to fully detach.
7
You can now lift up the entire platter shelf and crisper cover assembly and pull forward to remove.
8
Next, lift up the front of the left crisper drawer glide assembly and pull forward to remove.
9
Do the same to remove the right crisper drawer glide assembly.
10
Open the pantry drawer and lift up the pantry cover glass from underneath to unseat it, then remove.
11
Pull the drawer forward then hold the slide rails as you push the drawer back and lift up to remove.
12
Lift up the rear of the pantry cover glass frame and pull back to remove.
13
Use the ninety-degree pick to help pry the retaining tabs out to detach the left and right pantry rail support trim pieces.
14
You can now remove the support bar and lift off the old pantry front cover assembly.
15
To install the new pantry front cover assembly, insert the cover tabs into the slots in the two rail supports.
16
Align the support bar on the rear of the new assembly.
17
Realign and snap the left and right trim pieces into place.
18
Reinstall the pantry cover glass frame by first aligning the damper arm with the slider control then set the rear of the frame into place.
19
Confirm the pantry drawer slide rails are pulled out then insert the support bracket tabs into the slots in the side channels of the drawer and push the drawer in.
20
Set the pantry cover glass into the frame.
21
Now reinstall both the left and right crisper glide assemblies by aligning them on the liner’s rear mounting posts first then lower them onto the front mounting posts.
22
Fully reposition the platter shelf and crisper cover assembly in the refrigerator.
23
To reinstall the crisper drawers, pull the side rails out then insert the support bracket tabs into the slots in the side channels of the drawers and push the drawers in.
24
Reinsert the crisper cover glass in the space between the platter shelf and crisper cover and push back until the glass is fully seated in the cover.
25
Realign the platter shelf glass in the frame.
26
Finally, reinstall the glass shelves by hooking the upper bracket tabs into the appropriate slots in the shelf support then lower the front of the shelves.
Description
This video provides step-by-step repair instructions for replacing the pantry front cover on a KitchenAid Refrigerator (Model KRFF507HPS02). The most common reason for replacing this part is if it is damaged or missing.
All of the information for this video is applicable to the following brands: KitchenAid
All of the information for this video is applicable to the following brands: KitchenAid
Step-By-Step Instructions
1
To replace the pantry front cover assembly in this kitchenaid refrigerator, you will need a ninety-degree pick.
2
Your first step is to remove all four glass shelves by lifting the front of each shelf up then detach the bracket tabs from the shelf support to remove.
3
Next, pull the platter shelf forward and lift the platter shelf glass up from underneath to remove.
4
Next, open both crisper drawers, reach in and push the crisper cover glass up and forward from underneath.
5
Close the drawers and remove the glass.
6
Now fully uninstall both crisper drawers by pulling them forward then hold the side support brackets as you push the drawers back to fully detach.
7
You can now lift up the entire platter shelf and crisper cover assembly and pull forward to remove.
8
Next, lift up the front of the left crisper drawer glide assembly and pull forward to remove.
9
Do the same to remove the right crisper drawer glide assembly.
10
Open the pantry drawer and lift up the pantry cover glass from underneath to unseat it, then remove.
11
Pull the drawer forward then hold the slide rails as you push the drawer back and lift up to remove.
12
Lift up the rear of the pantry cover glass frame and pull back to remove.
13
Use the ninety-degree pick to help pry the retaining tabs out to detach the left and right pantry rail support trim pieces.
14
You can now remove the support bar and lift off the old pantry front cover assembly.
15
To install the new pantry front cover assembly, insert the cover tabs into the slots in the two rail supports.
16
Align the support bar on the rear of the new assembly.
17
Realign and snap the left and right trim pieces into place.
18
Reinstall the pantry cover glass frame by first aligning the damper arm with the slider control then set the rear of the frame into place.
19
Confirm the pantry drawer slide rails are pulled out then insert the support bracket tabs into the slots in the side channels of the drawer and push the drawer in.
20
Set the pantry cover glass into the frame.
21
Now reinstall both the left and right crisper glide assemblies by aligning them on the liner’s rear mounting posts first then lower them onto the front mounting posts.
22
Fully reposition the platter shelf and crisper cover assembly in the refrigerator.
23
To reinstall the crisper drawers, pull the side rails out then insert the support bracket tabs into the slots in the side channels of the drawers and push the drawers in.
24
Reinsert the crisper cover glass in the space between the platter shelf and crisper cover and push back until the glass is fully seated in the cover.
25
Realign the platter shelf glass in the frame.
26
Finally, reinstall the glass shelves by hooking the upper bracket tabs into the appropriate slots in the shelf support then lower the front of the shelves.
Applicable Product Model
Related Articles & Videos
02:47
Part Replacement
KitchenAid Refrigerator Lower Freezer Drawer Replacement W10594047
10:40
Part Replacement
KitchenAid Refrigerator Evaporator Fan Motor Replacement W11224591
04:12
Part Replacement
KitchenAid Refrigerator Upper Access Panel LED Light Assembly Replacement W11484839
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com