Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairKitchenAid Refrigerator Water Filter Housing Replacement W11482384 
This video provides step-by-step repair instructions for replacing the water filter housing on a KitchenAid Refrigerator (Model KRFF507HPS02). The most common reason for replacing this part is if it is leaking.
All of the information for this video is applicable to the following brands: KitchenAid
KitchenAid Refrigerator Water Filter Housing Replacement W11482384
Skill Level
Total Parts Cost
$53.20Estimated Savings
$112.5003:31
- Description
This video provides step-by-step repair instructions for replacing the water filter housing on a KitchenAid Refrigerator (Model KRFF507HPS02). The most common reason for replacing this part is if it is leaking.
All of the information for this video is applicable to the following brands: KitchenAid
Step By Step Instructions
1
To replace the water filter housing in this kitchenaid refrigerator, you will need a quarter-inch nut driver.
2
Before you begin the procedure, unplug the appliance’s power cord.
3
Shut off the home’s water supply line valve.
4
Open the water filter cover and remove the water filter.
5
Use the quarter-inch nut driver to unthread the two screws securing the upper cover panel.
6
Detach the panel and disconnect the led light wire harness to fully remove the panel.
7
Now pull down the clasp and detach the water filter supply line from the filter housing.
8
Detach the outlet line as well.
9
Now pull the right side of the water filter housing down to detach and you can remove the old component.
10
To install the new water filter housing, insert the left port through the hole in the upper housing then snap the right port into place.
11
Attach the outlet line to the left port and close the clasp to secure.
12
Do the same to secure the supply line to the right port.
13
Reinstall the upper cover panel by first reconnecting the led light wire harness.
14
Align the three rear upper cover panel tabs with the housing brackets and snap the panel into position.
15
Rethread the two screws to secure.
16
Insert the water filter into the new housing and close the cover.
17
Turn the water supply back on, plug the power cord back in, and the refrigerator should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the water filter housing on a KitchenAid Refrigerator (Model KRFF507HPS02). The most common reason for replacing this part is if it is leaking.
All of the information for this video is applicable to the following brands: KitchenAid
This video provides step-by-step repair instructions for replacing the water filter housing on a KitchenAid Refrigerator (Model KRFF507HPS02). The most common reason for replacing this part is if it is leaking.
All of the information for this video is applicable to the following brands: KitchenAid
Step-By-Step Instructions
1
To replace the water filter housing in this kitchenaid refrigerator, you will need a quarter-inch nut driver.
2
Before you begin the procedure, unplug the appliance’s power cord.
3
Shut off the home’s water supply line valve.
4
Open the water filter cover and remove the water filter.
5
Use the quarter-inch nut driver to unthread the two screws securing the upper cover panel.
6
Detach the panel and disconnect the led light wire harness to fully remove the panel.
7
Now pull down the clasp and detach the water filter supply line from the filter housing.
8
Detach the outlet line as well.
9
Now pull the right side of the water filter housing down to detach and you can remove the old component.
10
To install the new water filter housing, insert the left port through the hole in the upper housing then snap the right port into place.
11
Attach the outlet line to the left port and close the clasp to secure.
12
Do the same to secure the supply line to the right port.
13
Reinstall the upper cover panel by first reconnecting the led light wire harness.
14
Align the three rear upper cover panel tabs with the housing brackets and snap the panel into position.
15
Rethread the two screws to secure.
16
Insert the water filter into the new housing and close the cover.
17
Turn the water supply back on, plug the power cord back in, and the refrigerator should be ready for use.
Applicable Product Model
Parts Needed
Water Filter Housing
$53.20
Total$0.00
Related Articles & Videos
02:47
Part Replacement
KitchenAid Refrigerator Lower Freezer Drawer Replacement W10594047
10:40
Part Replacement
KitchenAid Refrigerator Evaporator Fan Motor Replacement W11224591
04:12
Part Replacement
KitchenAid Refrigerator Upper Access Panel LED Light Assembly Replacement W11484839
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com