Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairKitchenAid Refrigerator Water Reservoir Replacement W11482382 
This video provides step-by-step repair instructions for replacing the water reservoir on a KitchenAid Refrigerator (Model KRFF507HPS02). The most common reason for replacing this part is if the refrigerator is leaking.
All of the information for this video is applicable to the following brands: KitchenAid
KitchenAid Refrigerator Water Reservoir Replacement W11482382
Skill Level
Total Parts Cost
$95.53Estimated Savings
$112.5006:11
- Description
This video provides step-by-step repair instructions for replacing the water reservoir on a KitchenAid Refrigerator (Model KRFF507HPS02). The most common reason for replacing this part is if the refrigerator is leaking.
All of the information for this video is applicable to the following brands: KitchenAid
Step By Step Instructions
1
To replace the water reservoir in this kitchenaid refrigerator, you will need a quarter-inch nut driver, a 7/16th inch wrench, wire cutters, and zip-ties.
2
Before you begin the procedure, unplug the appliance’s power cord.
3
Shut off the home’s water supply line valve.
4
Open the water filter cover and remove the water filter.
5
Use the quarter-inch nut driver to unthread the two screws securing the upper cover panel.
6
Detach the panel and disconnect the led light wire harness to fully remove the panel.
7
Pull the dual water valve down for better access to the water line.
8
Slide out the locking clip then use the 7/16th inch wrench to depress the retaining ring to release the water valve inlet line.
9
Now pull down the clasp, detach the water filter supply line from the filter housing, and remove the supply line spacer from the notch in the upper housing.
10
Detach the outlet line as well.
11
Use the wire cutters to cut the three zip-ties to release the old reservoir – be prepared for some water to spill.
12
Before you attempt to install the new water reservoir, unthread the three screws securing the upper housing.
13
Detach the housing from the mounting posts.
14
This will make it easier to feed the three new zip-ties into place to secure the new reservoir.
15
Snap the housing into position, and rethread the three screws.
16
Now position the new reservoir, and secure it with the zip-ties.
17
Attach the outlet line to the left water filter housing port and close the clasp to secure.
18
Seat the supply line spacer in the notch in the upper housing then attach the supply line to the right filter housing port and close the clasp.
19
Fully insert the new water valve inlet line into the port on the valve, and slide in the locking clip to secure.
20
Reseat the water valve.
21
Reinstall the upper cover panel by first reconnecting the led light wire harness.
22
Align the three rear upper cover panel tabs with the housing brackets and snap the panel into position.
23
Rethread the two screws to secure.
24
Reinsert the water filter into the housing and close the cover.
25
Turn the water supply back on, plug the power cord back in, and the refrigerator should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the water reservoir on a KitchenAid Refrigerator (Model KRFF507HPS02). The most common reason for replacing this part is if the refrigerator is leaking.
All of the information for this video is applicable to the following brands: KitchenAid
This video provides step-by-step repair instructions for replacing the water reservoir on a KitchenAid Refrigerator (Model KRFF507HPS02). The most common reason for replacing this part is if the refrigerator is leaking.
All of the information for this video is applicable to the following brands: KitchenAid
Step-By-Step Instructions
1
To replace the water reservoir in this kitchenaid refrigerator, you will need a quarter-inch nut driver, a 7/16th inch wrench, wire cutters, and zip-ties.
2
Before you begin the procedure, unplug the appliance’s power cord.
3
Shut off the home’s water supply line valve.
4
Open the water filter cover and remove the water filter.
5
Use the quarter-inch nut driver to unthread the two screws securing the upper cover panel.
6
Detach the panel and disconnect the led light wire harness to fully remove the panel.
7
Pull the dual water valve down for better access to the water line.
8
Slide out the locking clip then use the 7/16th inch wrench to depress the retaining ring to release the water valve inlet line.
9
Now pull down the clasp, detach the water filter supply line from the filter housing, and remove the supply line spacer from the notch in the upper housing.
10
Detach the outlet line as well.
11
Use the wire cutters to cut the three zip-ties to release the old reservoir – be prepared for some water to spill.
12
Before you attempt to install the new water reservoir, unthread the three screws securing the upper housing.
13
Detach the housing from the mounting posts.
14
This will make it easier to feed the three new zip-ties into place to secure the new reservoir.
15
Snap the housing into position, and rethread the three screws.
16
Now position the new reservoir, and secure it with the zip-ties.
17
Attach the outlet line to the left water filter housing port and close the clasp to secure.
18
Seat the supply line spacer in the notch in the upper housing then attach the supply line to the right filter housing port and close the clasp.
19
Fully insert the new water valve inlet line into the port on the valve, and slide in the locking clip to secure.
20
Reseat the water valve.
21
Reinstall the upper cover panel by first reconnecting the led light wire harness.
22
Align the three rear upper cover panel tabs with the housing brackets and snap the panel into position.
23
Rethread the two screws to secure.
24
Reinsert the water filter into the housing and close the cover.
25
Turn the water supply back on, plug the power cord back in, and the refrigerator should be ready for use.
Applicable Product Model
Parts Needed
Reservoir
$95.53
Total$0.00
Related Articles & Videos
02:47
Part Replacement
KitchenAid Refrigerator Lower Freezer Drawer Replacement W10594047
10:40
Part Replacement
KitchenAid Refrigerator Evaporator Fan Motor Replacement W11224591
04:12
Part Replacement
KitchenAid Refrigerator Upper Access Panel LED Light Assembly Replacement W11484839
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com