Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairKitchenAid Refrigerator Dual Valve To Hinge Water Line Replacement W11484606 
This video provides step-by-step repair instructions for replacing the dual valve to hinge water line on a KitchenAid Refrigerator (Model KRFF507HPS02). The most common reason for replacing this part is if the water line is leaking.
All of the information for this video is applicable to the following brands: KitchenAid
KitchenAid Refrigerator Dual Valve To Hinge Water Line Replacement W11484606
Skill Level
Total Parts Cost
$57.83Estimated Savings
$112.5004:33
- Description
This video provides step-by-step repair instructions for replacing the dual valve to hinge water line on a KitchenAid Refrigerator (Model KRFF507HPS02). The most common reason for replacing this part is if the water line is leaking.
All of the information for this video is applicable to the following brands: KitchenAid
Step By Step Instructions
1
To replace the dual valve-to-door hinge water line in this kitchenaid refrigerator, you will need a quarter-inch nut driver, a small flat-head screwdriver, a phillips-head screwdriver, and a 7/16th inch wrench.
2
Before you begin the procedure, unplug the appliance’s power cord.
3
Shut off the home’s water supply line valve.
4
Open the water filter cover and remove the water filter.
5
Use the quarter-inch nut driver to unthread the two screws securing the upper cover panel.
6
Detach the panel and disconnect the led light wire harness to fully remove the panel.
7
Use the small flat-head screwdriver to pry the water line retaining bracket free.
8
Use the 7/16th inch wrench to depress the retaining ring to release the dispenser outlet line from the dual water valve.
9
Next, use the phillips-head screwdriver to unthread the screw to detach the upper left door hinge cover.
10
Lift up the clasp and detach the dispenser water supply line.
11
You can now pull out the old water line.
12
To install the new dual valve-to-door hinge water line, feed the appropriate end through the channel in the top of the cabinet until it protrudes through the hole in the upper liner.
13
Join the dispenser supply line to the new water line and close the clasp to secure.
14
Realign the hinge cover and secure it with the screw.
15
Fully insert the line into the port on the dual valve.
16
Reposition the water line retaining bracket.
17
Reinstall the upper cover panel by first reconnecting the led light wire harness.
18
Align the three rear upper cover panel tabs with the housing brackets and snap the panel into position.
19
Rethread the two screws to secure.
20
Reinsert the water filter into the housing and close the cover.
21
Turn the water supply back on, plug the power cord back in, and the refrigerator should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the dual valve to hinge water line on a KitchenAid Refrigerator (Model KRFF507HPS02). The most common reason for replacing this part is if the water line is leaking.
All of the information for this video is applicable to the following brands: KitchenAid
This video provides step-by-step repair instructions for replacing the dual valve to hinge water line on a KitchenAid Refrigerator (Model KRFF507HPS02). The most common reason for replacing this part is if the water line is leaking.
All of the information for this video is applicable to the following brands: KitchenAid
Step-By-Step Instructions
1
To replace the dual valve-to-door hinge water line in this kitchenaid refrigerator, you will need a quarter-inch nut driver, a small flat-head screwdriver, a phillips-head screwdriver, and a 7/16th inch wrench.
2
Before you begin the procedure, unplug the appliance’s power cord.
3
Shut off the home’s water supply line valve.
4
Open the water filter cover and remove the water filter.
5
Use the quarter-inch nut driver to unthread the two screws securing the upper cover panel.
6
Detach the panel and disconnect the led light wire harness to fully remove the panel.
7
Use the small flat-head screwdriver to pry the water line retaining bracket free.
8
Use the 7/16th inch wrench to depress the retaining ring to release the dispenser outlet line from the dual water valve.
9
Next, use the phillips-head screwdriver to unthread the screw to detach the upper left door hinge cover.
10
Lift up the clasp and detach the dispenser water supply line.
11
You can now pull out the old water line.
12
To install the new dual valve-to-door hinge water line, feed the appropriate end through the channel in the top of the cabinet until it protrudes through the hole in the upper liner.
13
Join the dispenser supply line to the new water line and close the clasp to secure.
14
Realign the hinge cover and secure it with the screw.
15
Fully insert the line into the port on the dual valve.
16
Reposition the water line retaining bracket.
17
Reinstall the upper cover panel by first reconnecting the led light wire harness.
18
Align the three rear upper cover panel tabs with the housing brackets and snap the panel into position.
19
Rethread the two screws to secure.
20
Reinsert the water filter into the housing and close the cover.
21
Turn the water supply back on, plug the power cord back in, and the refrigerator should be ready for use.
Applicable Product Model
Parts Needed
Water Line
$57.83
Total$0.00
Related Articles & Videos
02:47
Part Replacement
KitchenAid Refrigerator Lower Freezer Drawer Replacement W10594047
10:40
Part Replacement
KitchenAid Refrigerator Evaporator Fan Motor Replacement W11224591
04:12
Part Replacement
KitchenAid Refrigerator Upper Access Panel LED Light Assembly Replacement W11484839
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com