Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairKitchenAid Refrigerator Dual Water Valve Replacement W10347055 
This video provides step-by-step repair instructions for replacing the dual water valve on a KitchenAid Refrigerator (Model KRFF507HPS02). The most common reason for replacing this part is if the dispenser is not working properly.
All of the information for this video is applicable to the following brands: KitchenAid
KitchenAid Refrigerator Dual Water Valve Replacement W10347055
Skill Level
Total Parts Cost
$119.50Estimated Savings
$112.5004:27
- Description
This video provides step-by-step repair instructions for replacing the dual water valve on a KitchenAid Refrigerator (Model KRFF507HPS02). The most common reason for replacing this part is if the dispenser is not working properly.
All of the information for this video is applicable to the following brands: KitchenAid
Step By Step Instructions
1
To replace the dual water valve in this kitchenaid refrigerator, you will need a quarter-inch nut driver, a small flat-head screwdriver, and a 7/16th inch wrench.
2
Before you begin the procedure, unplug the appliance’s power cord…
3
Shut off the home’s water supply line valve.
4
Open the water filter cover and remove the water filter.
5
Use the quarter-inch nut driver to unthread the two screws securing the upper cover panel.
6
Detach the panel and disconnect the led light wire harness to fully remove the panel.
7
Use the small flat-head screwdriver to pry the water line retaining bracket free.
8
Pull the dual water valve down to detach.
9
Disconnect the two wire connecters, and detach the grounding clip.
10
Use the 7/16th inch wrench to depress the retaining rings to release the three water lines.
11
You will need to slide out the locking clip first before you can release the water valve inlet line.
12
To install the new dual water valve, first insert the water lines into the appropriate ports.
13
Slide in the locking clip to secure the inlet line.
14
Connect the two wire connecters and attach the grounding clip.
15
Align and snap the new valve into place in the upper housing.
16
Reposition the water line retaining bracket.
17
Reinstall the upper cover panel by first reconnecting the led light wire harness.
18
Align the three rear upper cover panel tabs with the housing brackets and snap the panel into position.
19
Rethread the two screws to secure.
20
Reinsert the water filter into the housing and close the cover.
21
Turn the water supply back on, plug the power cord back in, and the refrigerator should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the dual water valve on a KitchenAid Refrigerator (Model KRFF507HPS02). The most common reason for replacing this part is if the dispenser is not working properly.
All of the information for this video is applicable to the following brands: KitchenAid
This video provides step-by-step repair instructions for replacing the dual water valve on a KitchenAid Refrigerator (Model KRFF507HPS02). The most common reason for replacing this part is if the dispenser is not working properly.
All of the information for this video is applicable to the following brands: KitchenAid
Step-By-Step Instructions
1
To replace the dual water valve in this kitchenaid refrigerator, you will need a quarter-inch nut driver, a small flat-head screwdriver, and a 7/16th inch wrench.
2
Before you begin the procedure, unplug the appliance’s power cord…
3
Shut off the home’s water supply line valve.
4
Open the water filter cover and remove the water filter.
5
Use the quarter-inch nut driver to unthread the two screws securing the upper cover panel.
6
Detach the panel and disconnect the led light wire harness to fully remove the panel.
7
Use the small flat-head screwdriver to pry the water line retaining bracket free.
8
Pull the dual water valve down to detach.
9
Disconnect the two wire connecters, and detach the grounding clip.
10
Use the 7/16th inch wrench to depress the retaining rings to release the three water lines.
11
You will need to slide out the locking clip first before you can release the water valve inlet line.
12
To install the new dual water valve, first insert the water lines into the appropriate ports.
13
Slide in the locking clip to secure the inlet line.
14
Connect the two wire connecters and attach the grounding clip.
15
Align and snap the new valve into place in the upper housing.
16
Reposition the water line retaining bracket.
17
Reinstall the upper cover panel by first reconnecting the led light wire harness.
18
Align the three rear upper cover panel tabs with the housing brackets and snap the panel into position.
19
Rethread the two screws to secure.
20
Reinsert the water filter into the housing and close the cover.
21
Turn the water supply back on, plug the power cord back in, and the refrigerator should be ready for use.
Applicable Product Model
Parts Needed
Water Inlet Valve
$119.50
Total$0.00
Related Articles & Videos
02:47
Part Replacement
KitchenAid Refrigerator Lower Freezer Drawer Replacement W10594047
10:40
Part Replacement
KitchenAid Refrigerator Evaporator Fan Motor Replacement W11224591
04:12
Part Replacement
KitchenAid Refrigerator Upper Access Panel LED Light Assembly Replacement W11484839
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com