Video & Articles: Appliance & Equipment RepairKitchenAid Refrigerator Ice Box Cover Replacement WPW10553630

KitchenAid Refrigerator Ice Box Cover Replacement WPW10553630

03:14


This video provides step-by-step repair instructions for replacing the ice box cover on a KitchenAid Refrigerator (Model KRFF507HPS02). The most common reason for replacing this part is if it is damaged or missing.

All of the information for this video is applicable to the following brands: KitchenAid

Step By Step Instructions

1
To replace the ice box cover in this kitchenaid refrigerator, you will need a quarter-inch nut driver and a small flat-head screwdriver.
2
Before you begin the procedure, unplug the appliance’s power cord.
3
Open the water filter cover and remove the water filter.
4
Use the quarter-inch nut driver to unthread the two screws securing the upper cover panel.
5
Detach the panel and disconnect the led light wire harness to fully remove the panel.
6
Use the small flat-head screwdriver to release the retaining tabs to detach the ice box cover.
7
Disconnect the heater wire connecter to fully remove the old cover.
8
To install the new ice box cover, first connect the heater wire connecter.
9
Align the top edge of the new cover then snap the bottom of the cover into place.
10
Reinstall the upper cover panel by first reconnecting the led light wire harness.
11
Align the three rear upper cover panel tabs with the housing brackets and snap the panel into position.
12
Rethread the two screws to secure.
13
Reinsert the water filter into the housing and close the cover.
14
Plug the power cord back in, and the refrigerator should be ready for use.
Description


This video provides step-by-step repair instructions for replacing the ice box cover on a KitchenAid Refrigerator (Model KRFF507HPS02). The most common reason for replacing this part is if it is damaged or missing.

All of the information for this video is applicable to the following brands: KitchenAid
Step-By-Step Instructions
1
To replace the ice box cover in this kitchenaid refrigerator, you will need a quarter-inch nut driver and a small flat-head screwdriver.
2
Before you begin the procedure, unplug the appliance’s power cord.
3
Open the water filter cover and remove the water filter.
4
Use the quarter-inch nut driver to unthread the two screws securing the upper cover panel.
5
Detach the panel and disconnect the led light wire harness to fully remove the panel.
6
Use the small flat-head screwdriver to release the retaining tabs to detach the ice box cover.
7
Disconnect the heater wire connecter to fully remove the old cover.
8
To install the new ice box cover, first connect the heater wire connecter.
9
Align the top edge of the new cover then snap the bottom of the cover into place.
10
Reinstall the upper cover panel by first reconnecting the led light wire harness.
11
Align the three rear upper cover panel tabs with the housing brackets and snap the panel into position.
12
Rethread the two screws to secure.
13
Reinsert the water filter into the housing and close the cover.
14
Plug the power cord back in, and the refrigerator should be ready for use.

Applicable Product Model

icons/refrigerator
Brand
Product Type
Model
Subtype
Product Diagram & Manuals
Parts Needed
Cover
Cover
$55.29
Total$0.00

Related Articles & Videos

02:47
Part Replacement
KitchenAid Refrigerator Lower Freezer Drawer Replacement W10594047
10:40
Part Replacement
KitchenAid Refrigerator Evaporator Fan Motor Replacement W11224591
08:29
Part Replacement
KitchenAid Refrigerator Ice Maker Assembly Replacement W11483245
04:12
Part Replacement
KitchenAid Refrigerator Upper Access Panel LED Light Assembly Replacement W11484839
04:13
Part Replacement
KitchenAid Refrigerator Main Control Board Replacement W11224256