Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairLG Washer 1.5" Drain Bellow Tension Clamp Replacement 4861FR3068E
This video provides step-by-step repair instructions for replacing the 1.5" drain bellow tension clamp in an LG washer (Model WM4000HBA). The most common reason for replacing this part is if it's missing or broken.
This replacement video is applicable to the following brands:
LG
Don't forget to like and comment on this video and subscribe to our channel!
LG Washer 1.5" Drain Bellow Tension Clamp Replacement 4861FR3068E
Skill Level
Total Parts Cost
$13.41Estimated Savings
$112.5003:09
- Description
This video provides step-by-step repair instructions for replacing the 1.5" drain bellow tension clamp in an LG washer (Model WM4000HBA). The most common reason for replacing this part is if it's missing or broken.
This replacement video is applicable to the following brands:
LG
Don't forget to like and comment on this video and subscribe to our channel!
Step By Step Instructions
1
To replace the one and a half inch drain bellow tension clamp in your lg washer, you will need channellock pliers, and a drill driver with a phillips bit.
2
Before you begin the procedure, unplug the washer.
3
Turn off the water.
4
Pull the washer away from the wall.
5
Unthread the water supply lines. be prepared for water to spill.
6
Now set the washer on its back.
7
Depending on the location of the repair, slide back the tension clamp, then remove the end of the bellow and detach the clamp.
8
To install the new drain bellow tension clamp, slide the clamp over the end of the bellow and reattach the bellow.
9
Slide the clamp to secure the bellow.
10
Sit the washer upright.
11
Rethread the water supply onto the hot and cold inlets.
12
Push the washer back into place.
13
Plug the power cord back in, and turn on the water supply, and your washer should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the 1.5" drain bellow tension clamp in an LG washer (Model WM4000HBA). The most common reason for replacing this part is if it's missing or broken.
This replacement video is applicable to the following brands:
LG
Don't forget to like and comment on this video and subscribe to our channel!
This video provides step-by-step repair instructions for replacing the 1.5" drain bellow tension clamp in an LG washer (Model WM4000HBA). The most common reason for replacing this part is if it's missing or broken.
This replacement video is applicable to the following brands:
LG
Don't forget to like and comment on this video and subscribe to our channel!
Step-By-Step Instructions
1
To replace the one and a half inch drain bellow tension clamp in your lg washer, you will need channellock pliers, and a drill driver with a phillips bit.
2
Before you begin the procedure, unplug the washer.
3
Turn off the water.
4
Pull the washer away from the wall.
5
Unthread the water supply lines. be prepared for water to spill.
6
Now set the washer on its back.
7
Depending on the location of the repair, slide back the tension clamp, then remove the end of the bellow and detach the clamp.
8
To install the new drain bellow tension clamp, slide the clamp over the end of the bellow and reattach the bellow.
9
Slide the clamp to secure the bellow.
10
Sit the washer upright.
11
Rethread the water supply onto the hot and cold inlets.
12
Push the washer back into place.
13
Plug the power cord back in, and turn on the water supply, and your washer should be ready for use.
Applicable Product Model
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com