Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairGE Washer Right Lid Bushing Replacement WH02X24389
This video provides step-by-step repair instructions for replacing the right lid bushing on a GE washer (Model GTW465ASN2WW). The most common reason for replacing this part is if it's missing or broken.
This replacement video is applicable to the following brands:
GE
Screws affiliated with washer-
Don't forget to like and comment on this video and subscribe to our channel!
GE Washer Right Lid Bushing Replacement WH02X24389
Skill Level
Total Parts Cost
$7.27Estimated Savings
$112.5002:53
- Description
This video provides step-by-step repair instructions for replacing the right lid bushing on a GE washer (Model GTW465ASN2WW). The most common reason for replacing this part is if it's missing or broken.
This replacement video is applicable to the following brands:
GE
Screws affiliated with washer-
Don't forget to like and comment on this video and subscribe to our channel!
Step By Step Instructions
1
To replace the right lid bushing on your ge washer, you will need a drill driver with a 1/4” bit and a #2 phillips bit.
2
Before you begin the procedure, unplug the power to the appliance.
3
Unthread the two screws on the panel. any missing screws can be ordered through the links in the description below.
4
Pull the panel out from the bottom and slide it to the right to free it from the backsplash.
5
Slide the backsplash back and lift up to move it out of the way, you can use a small chain or bungee cord to support it.
6
Unthread the screw.
7
Lift the tab to a 90° angle and tilt the lid, then slide the bushing off.
8
To install the new right lid bushing, lift the lid and place the bushing over the hinge.
9
Lower the lid while angling the bushing 90° and inserting it into the hole.
10
Fold it down to seat it.
11
Rethread the screw.
12
Remove the support from the backsplash.
13
Tilt the backsplash upright and insert the tabs into the slots.
14
Push forward to lock it in place.
15
Insert the panel tabs into the slots on the backsplash then slide it left to secure it.
16
Rethread the two screws.
17
Plug in the washer.
Description
This video provides step-by-step repair instructions for replacing the right lid bushing on a GE washer (Model GTW465ASN2WW). The most common reason for replacing this part is if it's missing or broken.
This replacement video is applicable to the following brands:
GE
Screws affiliated with washer-
Don't forget to like and comment on this video and subscribe to our channel!
This video provides step-by-step repair instructions for replacing the right lid bushing on a GE washer (Model GTW465ASN2WW). The most common reason for replacing this part is if it's missing or broken.
This replacement video is applicable to the following brands:
GE
Screws affiliated with washer-
Don't forget to like and comment on this video and subscribe to our channel!
Step-By-Step Instructions
1
To replace the right lid bushing on your ge washer, you will need a drill driver with a 1/4” bit and a #2 phillips bit.
2
Before you begin the procedure, unplug the power to the appliance.
3
Unthread the two screws on the panel. any missing screws can be ordered through the links in the description below.
4
Pull the panel out from the bottom and slide it to the right to free it from the backsplash.
5
Slide the backsplash back and lift up to move it out of the way, you can use a small chain or bungee cord to support it.
6
Unthread the screw.
7
Lift the tab to a 90° angle and tilt the lid, then slide the bushing off.
8
To install the new right lid bushing, lift the lid and place the bushing over the hinge.
9
Lower the lid while angling the bushing 90° and inserting it into the hole.
10
Fold it down to seat it.
11
Rethread the screw.
12
Remove the support from the backsplash.
13
Tilt the backsplash upright and insert the tabs into the slots.
14
Push forward to lock it in place.
15
Insert the panel tabs into the slots on the backsplash then slide it left to secure it.
16
Rethread the two screws.
17
Plug in the washer.
Applicable Product Model
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com