Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairGE Washer Lid Lock & Harness Replacement WH08X32657
This video provides step-by-step repair instructions for replacing the lid lock & harness in a GE washer (Model GTW465ASN2WW). The most common reason for replacing this part is if it's missing or broken.
This replacement video is applicable to the following brands:
GE
Screws affiliated with washer-
Don't forget to like and comment on this video and subscribe to our channel!
GE Washer Lid Lock & Harness Replacement WH08X32657
Skill Level
Total Parts Cost
$46.02Estimated Savings
$112.5006:28
- Description
This video provides step-by-step repair instructions for replacing the lid lock & harness in a GE washer (Model GTW465ASN2WW). The most common reason for replacing this part is if it's missing or broken.
This replacement video is applicable to the following brands:
GE
Screws affiliated with washer-
Don't forget to like and comment on this video and subscribe to our channel!
Step By Step Instructions
1
To replace the lid lock and harness on your ge washer, you will need a drill driver with a 1/4” bit, a putty knife, a utility knife blade, and needlenose pliers.
2
Before you begin the procedure, unplug the power to the appliance.
3
Move the tub forward to make it easier to reach the bezel.
4
As soon as you feel the ears to the bezel push on tab out and push up to free it. then repeat the same action for the other side.
5
Use the putty knife to depress the tab and slide the lid lock free from the top.
6
Unthread the two screws on the panel. any missing screws can be ordered through the links in the description below.
7
Pull the panel out from the bottom and slide it to the right to free it from the backsplash.
8
Slide the backsplash back and tilt forward
9
Unplug the lid switch harness.
10
Carefully slide the capacitor to the left
11
Now remove the two ¼” screws.
12
Use the pliers to slide the two retaining clips into the washer.
13
Pinch the harness retaining clip and push it into the washer.
14
Insert the putty knife approximatly 8 ½”
15
From the edge on both sides and press in firmly to release the spring clips from the panel.
16
Lift the top slightly and slide the harness retainer out. then slide the lid to the side for easy access to the retaining clips.
17
Use the utility blade to undo the two retaining clips.
18
To install the new lid lock & harness, run the plug end of the harness through the top.
19
Insert the two harness retaining clips.
20
Tuck the harness into the inner lip while snapping the two retaining clips along the edge of the top.
21
Slide and snap the lock into postion.
22
Slide the top panel over and reinsert the harness retainer.
23
Plug in the wire harness.
24
Align and firmly press down on the front of the top to secure it in place
25
Rethread the two ¼” screws.
26
Slide the capacitor back into its groove
27
Tilt the backsplash upright and insert the tabs into the slots.
28
Insert the panel tabs into the slots on the backsplash then slide it left to secure it.
29
Rethread the two screws.
30
Place the ears of the bezel into the slots and snap into position.
31
Plug in the washer.
32
And your washer should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the lid lock & harness in a GE washer (Model GTW465ASN2WW). The most common reason for replacing this part is if it's missing or broken.
This replacement video is applicable to the following brands:
GE
Screws affiliated with washer-
Don't forget to like and comment on this video and subscribe to our channel!
This video provides step-by-step repair instructions for replacing the lid lock & harness in a GE washer (Model GTW465ASN2WW). The most common reason for replacing this part is if it's missing or broken.
This replacement video is applicable to the following brands:
GE
Screws affiliated with washer-
Don't forget to like and comment on this video and subscribe to our channel!
Step-By-Step Instructions
1
To replace the lid lock and harness on your ge washer, you will need a drill driver with a 1/4” bit, a putty knife, a utility knife blade, and needlenose pliers.
2
Before you begin the procedure, unplug the power to the appliance.
3
Move the tub forward to make it easier to reach the bezel.
4
As soon as you feel the ears to the bezel push on tab out and push up to free it. then repeat the same action for the other side.
5
Use the putty knife to depress the tab and slide the lid lock free from the top.
6
Unthread the two screws on the panel. any missing screws can be ordered through the links in the description below.
7
Pull the panel out from the bottom and slide it to the right to free it from the backsplash.
8
Slide the backsplash back and tilt forward
9
Unplug the lid switch harness.
10
Carefully slide the capacitor to the left
11
Now remove the two ¼” screws.
12
Use the pliers to slide the two retaining clips into the washer.
13
Pinch the harness retaining clip and push it into the washer.
14
Insert the putty knife approximatly 8 ½”
15
From the edge on both sides and press in firmly to release the spring clips from the panel.
16
Lift the top slightly and slide the harness retainer out. then slide the lid to the side for easy access to the retaining clips.
17
Use the utility blade to undo the two retaining clips.
18
To install the new lid lock & harness, run the plug end of the harness through the top.
19
Insert the two harness retaining clips.
20
Tuck the harness into the inner lip while snapping the two retaining clips along the edge of the top.
21
Slide and snap the lock into postion.
22
Slide the top panel over and reinsert the harness retainer.
23
Plug in the wire harness.
24
Align and firmly press down on the front of the top to secure it in place
25
Rethread the two ¼” screws.
26
Slide the capacitor back into its groove
27
Tilt the backsplash upright and insert the tabs into the slots.
28
Insert the panel tabs into the slots on the backsplash then slide it left to secure it.
29
Rethread the two screws.
30
Place the ears of the bezel into the slots and snap into position.
31
Plug in the washer.
32
And your washer should be ready for use.
Applicable Product Model
Parts Needed
Door Lock
$46.02
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com