Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairGE Washer Capacitor & Bracket Replacement WH12X27614
This video provides step-by-step repair instructions for replacing the capacitor & bracket in a GE washer (Model GTW465ASN2WW). The most common reason for replacing this part is if it's missing or broken.
This replacement video is applicable to the following brands:
GE
Screws affiliated with washer-
Don't forget to like and comment on this video and subscribe to our channel!
GE Washer Capacitor & Bracket Replacement WH12X27614
Skill Level
Total Parts Cost
$101.80Estimated Savings
$112.5002:47
- Description
This video provides step-by-step repair instructions for replacing the capacitor & bracket in a GE washer (Model GTW465ASN2WW). The most common reason for replacing this part is if it's missing or broken.
This replacement video is applicable to the following brands:
GE
Screws affiliated with washer-
Don't forget to like and comment on this video and subscribe to our channel!
Step By Step Instructions
1
To replace the capacitor and bracket in your ge washer, you will need a drill driver with a 1/4” bit, a screwdriver, and needlenose pliers.
2
Before you begin the procedure, unplug the power to the appliance.
3
Unthread the two screws on the panel. any missing screws can be ordered through the links in the description below.
4
Pull the panel out from the bottom and slide it to the right to free it from the backsplash.
5
Note the orientation of the wires and use the needlenose pliers to remove them from the capacitor.
6
You can release electricity in the capacitor by placing a screwdriver over the two terminals. be careful not to let your hands come in contact with the shaft of the screwdriver.
7
Pull up on the capacitor to release it from the bracket.
8
Pull up on small tab of the bracket and twist it 45°, then lift to remove it.
9
To install the new capacitor and bracket kit, insert the bracket at a 45° angle and twist to lock it in place, align the capacitor with the grooves and push down to secure it.
10
Plug the wires back into the capacitor
11
Insert the panel tabs into the slots on the backsplash, then slide it left to secure it.
12
Rethread the two screws.
13
Plug in the washer, and your washer should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the capacitor & bracket in a GE washer (Model GTW465ASN2WW). The most common reason for replacing this part is if it's missing or broken.
This replacement video is applicable to the following brands:
GE
Screws affiliated with washer-
Don't forget to like and comment on this video and subscribe to our channel!
This video provides step-by-step repair instructions for replacing the capacitor & bracket in a GE washer (Model GTW465ASN2WW). The most common reason for replacing this part is if it's missing or broken.
This replacement video is applicable to the following brands:
GE
Screws affiliated with washer-
Don't forget to like and comment on this video and subscribe to our channel!
Step-By-Step Instructions
1
To replace the capacitor and bracket in your ge washer, you will need a drill driver with a 1/4” bit, a screwdriver, and needlenose pliers.
2
Before you begin the procedure, unplug the power to the appliance.
3
Unthread the two screws on the panel. any missing screws can be ordered through the links in the description below.
4
Pull the panel out from the bottom and slide it to the right to free it from the backsplash.
5
Note the orientation of the wires and use the needlenose pliers to remove them from the capacitor.
6
You can release electricity in the capacitor by placing a screwdriver over the two terminals. be careful not to let your hands come in contact with the shaft of the screwdriver.
7
Pull up on the capacitor to release it from the bracket.
8
Pull up on small tab of the bracket and twist it 45°, then lift to remove it.
9
To install the new capacitor and bracket kit, insert the bracket at a 45° angle and twist to lock it in place, align the capacitor with the grooves and push down to secure it.
10
Plug the wires back into the capacitor
11
Insert the panel tabs into the slots on the backsplash, then slide it left to secure it.
12
Rethread the two screws.
13
Plug in the washer, and your washer should be ready for use.
Applicable Product Model
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com