Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairGE Washer PCB Bracket Replacement WH16X24375
This video provides step-by-step repair instructions for replacing the PCB Bracket in a GE washer (Model GTW465ASN2WW). The most common reason for replacing this part is if it's missing or broken.
This replacement video is applicable to the following brands:
GE
Screws affiliated with washer-
Don't forget to like and comment on this video and subscribe to our channel!
GE Washer PCB Bracket Replacement WH16X24375
Skill Level
Total Parts Cost
$7.18Estimated Savings
$112.5003:20
- Description
This video provides step-by-step repair instructions for replacing the PCB Bracket in a GE washer (Model GTW465ASN2WW). The most common reason for replacing this part is if it's missing or broken.
This replacement video is applicable to the following brands:
GE
Screws affiliated with washer-
Don't forget to like and comment on this video and subscribe to our channel!
Step By Step Instructions
1
To replace the pcb bracket in your ge washer, you will need a drill driver with a 1/4” bit and needlenose pliers.
2
Before you begin the procedure, unplug the power to the appliance.
3
Unthread the two screws on the panel. any missing screws can be ordered through the links in the description below.
4
Pull the panel out from the bottom and slide it to the right to free it from the backsplash.
5
Slide the backsplash back and tilt forward.
6
Unthread the four screws holding the bracket.
7
Unhook the harness from the bracket.
8
Squeeze the two pegs to fully release the bracket.
9
To install the new pcb bracket, snap the two pegs into the control board.
10
Loop the harness around the hook.
11
Rethread the four screws.
12
Tilt the backsplash upright and insert the tabs into the slots.
13
Push forward to lock it in place.
14
Insert the panel tabs into the slots on the backsplash then slide it left to secure it.
15
Rethread the two screws.
16
Plug in the washer.
Description
This video provides step-by-step repair instructions for replacing the PCB Bracket in a GE washer (Model GTW465ASN2WW). The most common reason for replacing this part is if it's missing or broken.
This replacement video is applicable to the following brands:
GE
Screws affiliated with washer-
Don't forget to like and comment on this video and subscribe to our channel!
This video provides step-by-step repair instructions for replacing the PCB Bracket in a GE washer (Model GTW465ASN2WW). The most common reason for replacing this part is if it's missing or broken.
This replacement video is applicable to the following brands:
GE
Screws affiliated with washer-
Don't forget to like and comment on this video and subscribe to our channel!
Step-By-Step Instructions
1
To replace the pcb bracket in your ge washer, you will need a drill driver with a 1/4” bit and needlenose pliers.
2
Before you begin the procedure, unplug the power to the appliance.
3
Unthread the two screws on the panel. any missing screws can be ordered through the links in the description below.
4
Pull the panel out from the bottom and slide it to the right to free it from the backsplash.
5
Slide the backsplash back and tilt forward.
6
Unthread the four screws holding the bracket.
7
Unhook the harness from the bracket.
8
Squeeze the two pegs to fully release the bracket.
9
To install the new pcb bracket, snap the two pegs into the control board.
10
Loop the harness around the hook.
11
Rethread the four screws.
12
Tilt the backsplash upright and insert the tabs into the slots.
13
Push forward to lock it in place.
14
Insert the panel tabs into the slots on the backsplash then slide it left to secure it.
15
Rethread the two screws.
16
Plug in the washer.
Applicable Product Model
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com